: Hi Rob,

: I am using Captain's varnish (~manufactured June 2001). The can was full all
: the way when I started my first varnish coat on the outside ~2 1/2 weeks
: ago. The varnish blends somewhat (edges within ~1/16" smooth out),
: but a thickness variation is visible. I am using reasonable pressure on
: the brush trying to smooth the edge out.

: What is the optimum temperature? I am varnishing at ~70-80F and I am using
: lots of light (temperature goes up)

I'd try thinning it just a little, and use a 4' wide foam brush to cover it fairly
quickly.

Good Luck!

Rob