Date: 7/19/2002, 6:24 am
HI Chip,
Ever since the discussion about using a soft pad on you ROS to sand concave areas I have been using my homemade pad several times and really like it. You might recall I cut up a cheap ½" sleep camping foam pad and it works great. I first used it on the concave section of the SS stern and then on the 1" concave radius at the bottom of my skeg I just put on my boat and again it went quick and easy. You can see in the picture it has formed a permanent radius on the edge after some use. I spray glued the foam and hook and loop ROS and pressed them together, then sprayed the top side of the foam pad and stock a sticky sanding disc to it. If you have some foam handy you might give it a try in the inside of your boat.
John
Messages In This Thread
- Strip: This is the Hardest Part *Pic*
Chip Sandresky -- 7/19/2002, 3:28 am- Re: Strip: This is the Hardest Part
Greg Hughes -- 7/19/2002, 8:53 am- Re: Strip: This is the Hardest Part
Chip Sandresky -- 7/19/2002, 12:08 pm- Homemade Scraper
Charles Leach -- 7/19/2002, 9:39 am- Re: Another Type of Homemade Scraper
John Monroe -- 7/20/2002, 4:52 am- Re: Homemade Scraper *Pic*
Greg Hughes -- 7/19/2002, 5:39 pm- Re: Homemade Scraper *Pic*
Chip Sandresky -- 7/19/2002, 5:46 pm
- Re: Homemade Scraper *Pic*
Ben Staley -- 7/19/2002, 10:37 am- Re: Homemade Scraper
daren neufeld -- 7/19/2002, 8:42 pm- Re: Homemade Scraper
Ben Staley -- 7/29/2002, 10:32 am- Re: Homemade Scraper
daren neufeld -- 7/29/2002, 8:26 pm
- Re: Homemade Scraper
- Re: Homemade Scraper
Shawn Baker -- 7/19/2002, 11:32 am- Re: Homemade Scraper
Ben Staley -- 7/19/2002, 2:43 pm- Re: Plastic Scraps *Pic*
Shawn Baker -- 7/19/2002, 9:18 pm
- Re: Plastic Scraps *Pic*
- Re: Homemade Scraper
- Re: Homemade Scraper *Pic*
- Homemade Scraper
- Re: Strip: This is the Hardest Part *Pic*
John Monroe -- 7/19/2002, 6:24 am- Re: Strip: This is the Hardest Part
KenC -- 7/19/2002, 8:27 am- Re: Strip: This is the Hardest Part
John Monroe -- 7/20/2002, 4:26 am
- Re: Strip: This is the Hardest Part
- Re: Strip: This is the Hardest Part
- Re: Strip: This is the Hardest Part