Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: One Ocean Storm *PIC*
By:Shawn Jones
Date: 4/24/2017, 11:48 am
In Response To: Re: Strip: One Ocean Storm (JohnAbercrombie)

I was quite worried about warping. You can see in the pic that I used a thin plastic to cover everything.I did the carbon with fast set Raka hardener, and as soon as it was hard (green) I took it off, cut the carbon to size (which was easy if you flip it onto its back and use a sharp knife,using the wood edge as a guide) as soon as I cut it, I immediately put it in place and glassed it. Thankfully it didn't bow, or I would have had to use T pins or something to hold it.



Messages In This Thread

Strip: One Ocean Storm *PIC*
Shawn Jones -- 4/24/2017, 2:27 am
Re: Strip: One Ocean Storm
JohnAbercrombie -- 4/24/2017, 11:06 am
Re: Strip: One Ocean Storm *PIC*
Shawn Jones -- 4/24/2017, 11:48 am
Re: Strip: One Ocean Storm
Shawn Jones -- 4/24/2017, 11:55 am
Re: Strip: One Ocean Storm
Etienne Muller -- 4/24/2017, 1:22 pm
Re: Strip: One Ocean Storm
Shawn Jones -- 4/24/2017, 12:01 pm
Re: Strip: One Ocean Storm
JohnAbercrombie -- 4/24/2017, 1:10 pm
Re: Strip: One Ocean Storm
Tmh -- 4/24/2017, 1:29 pm
Re: Strip: One Ocean Storm
Shawn Jones -- 4/24/2017, 1:36 pm