Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Off Topic: Goin' with Yost measurements *PIC*
By:Tom Yost
Date: 2/3/2011, 9:21 am
In Response To: Off Topic: Goin' with Yost measurements (Paul G. Jacobson)

: Has anyone mentioned the weird way Yost specs his plans? Not inches
: and fractions, but in thousandths of a foot. Making a conversion
: to something that can actually be read on a tape measure is a
: minor task which hasn't stopped all those folks who build his
: designs!

Hi Paul,

I always work in metric, and with 25.4mm to an inch, measurements are quite accurate.
Converting to metric can be done manually, and as you mention is a minor task, or via an Excel spreadsheet.

Feet / decimal is unfortunately all my CAD allows, so my spreadsheet converts all to Metric (cm or mm) as
the case may be. (Feet X 12 X 25.4 = mm)

Here's a Metric conversion / offsets spreadsheet and a drawing of the flatwater training kayak I plan to build from it.
The offsets are for a multi-chine SOF version, but a hardshell requires only rounding of the hull shape using a flexible
thin nylon rod (R/C pushrod). I've done this in the past on two woodstrip versions of museum Iqyax surveys as well as a
George Dyson double baidarka.

Cheers, Tom

http://www.yostwerks.com/MeteorOffsets.xls - Meteor Offsets ( Deck offsets not yet included, but three variations are in the works)
Anyone interested can download this spreadsheet and use the format to create your own Imperial to metric conversions.

Messages In This Thread

Off Topic: Goin' Metric
John Caldeira -- 2/2/2011, 12:19 am
Re: Off Topic: Goin' Metric
JohnK -- 2/2/2011, 4:38 am
Re: Off Topic: Goin' Metric
Doug S -- 2/2/2011, 8:26 am
Re: Off Topic: Goin' Metric
Damian wentzel -- 2/2/2011, 9:19 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 1:51 am
Re: Off Topic: Goin' Metric
Richard Hayes -- 2/2/2011, 10:05 am
Re: Off Topic: Goin' Metric
Al Edie -- 2/2/2011, 11:49 am
Re: Off Topic: Goin' Metric
Mike Savage -- 2/2/2011, 1:03 pm
Re: Off Topic: Goin' Metric
Paul G. Jacobson -- 2/2/2011, 4:34 pm
Re: Off Topic: Goin' Metric
John Caldeira -- 2/2/2011, 9:10 pm
Re: Off Topic: Goin' Metric
Niven Paine -- 2/3/2011, 2:07 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 2:16 am
Re: Off Topic: Goin' Metric
Niven Paine -- 2/3/2011, 4:29 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 8:46 am
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 2:21 am
Re: Off Topic: Goin' Metric
Chris Richer -- 2/3/2011, 9:29 am
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 9:54 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 2:09 am
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 2:26 am
Re: Off Topic: Goin' Metric
Robert N Pruden -- 2/7/2011, 12:44 pm
Off Topic: Goin' with Yost measurements
Paul G. Jacobson -- 2/3/2011, 3:25 am
Re: Off Topic: Goin' with Yost measurements
Bill Hamm -- 2/3/2011, 8:48 am
Re: Off Topic: Goin' with Yost measurements *PIC*
Tom Yost -- 2/3/2011, 9:21 am
R/C pushrod
Doug S -- 2/3/2011, 1:29 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 3:29 pm
Re: R/C pushrod
Doug S -- 2/3/2011, 3:44 pm
Re: R/C pushrod
Les Cheeseman -- 2/3/2011, 3:47 pm
Re: R/C pushrod
Doug S -- 2/3/2011, 4:29 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 5:43 pm
Re: R/C pushrod *PIC*
Tom Yost -- 2/3/2011, 6:06 pm
Re: R/C pushrod
Clayton Plunkett -- 2/3/2011, 6:12 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 7:00 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 7:03 pm
Re: R/C pushrod
Clayton Plunkett -- 2/3/2011, 7:23 pm
Re: R/C pushrod *PIC*
Tom Yost -- 2/3/2011, 7:35 pm
Re: R/C pushrod
Randy Echtinaw -- 2/3/2011, 7:45 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 7:48 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 7:50 pm
Re: Off Topic: Goin' with Yost measurements
Robert N Pruden -- 2/7/2011, 12:34 pm
Re: Off Topic: Goin' with Yost measurements
Bill Hamm -- 2/8/2011, 12:39 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 2:04 am
Re: Off Topic: Goin' Metric
Paul G. Jacobson -- 2/3/2011, 3:18 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 1:53 am
Re: Off Topic: Goin' Metric
Richard Hayes -- 2/3/2011, 7:30 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 8:51 am
Re: Off Topic: Goin' Metric
Richard Hayes -- 2/3/2011, 1:33 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 3:32 pm
Re: Off Topic: Goin' Metric
Robert N Pruden -- 2/7/2011, 12:39 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/8/2011, 12:39 am
Re: Off Topic: Goin' Metric
dave -- 2/2/2011, 12:46 pm
Re: Off Topic: Goin' Metric
Paul G. Jacobson -- 2/2/2011, 4:37 pm
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/3/2011, 12:04 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 2:23 am
Re: Off Topic: Goin' Metric
Phil Nelson -- 2/3/2011, 2:34 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 8:54 am
Re: Off Topic: Goin' Metric
Phil Nelson -- 2/3/2011, 8:39 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 6:59 am
Re: Off Topic: Goin' Metric
Phil Nelson -- 2/4/2011, 7:17 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 7:23 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 7:31 am
Re: Off Topic: Goin' Metric
Bushwacker -- 2/4/2011, 10:48 am
Re: Off Topic: Goin' Metric
Todd O -- 2/4/2011, 11:29 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 12:28 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 7:17 am
Re: Off Topic: Goin' Metric
Phil Nelson -- 2/4/2011, 6:54 pm
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 3:13 am
Re: Off Topic: Goin' Metric
Alex Ferguson -- 2/3/2011, 4:31 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 8:56 am
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 10:05 am
Re: Off Topic: Goin' Metric
dhwdaniels -- 2/3/2011, 5:37 am
Re: Off Topic: Goin' Metric
dhwdaniels -- 2/3/2011, 5:29 am
Re: Off Topic: Goin' Metric
Mike Savage -- 2/3/2011, 6:28 am
Re: Off Topic: Goin' Metric
Les Cheeseman -- 2/3/2011, 8:48 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 9:00 am
Re: Off Topic: Goin' Metric
Les Cheeseman -- 2/3/2011, 9:06 am
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/3/2011, 11:28 am
Re: Off Topic: Goin' Metric
Mike Savage -- 2/3/2011, 1:28 pm
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/3/2011, 3:07 pm
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 5:56 pm
Re: Off Topic: Goin' Metric
Ian Johnson -- 2/4/2011, 12:48 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 7:12 am
Re: Off Topic: Goin' Metric
Mike Savage -- 2/4/2011, 1:15 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 1:38 pm
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/4/2011, 11:51 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/5/2011, 5:35 am
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/5/2011, 12:58 pm
Re: Off Topic: Goin' Metric
Charles Leach -- 2/5/2011, 1:53 pm
Re: Off Topic: Goin' Metric
Les Cheeseman -- 2/4/2011, 11:07 am
Re: Off Topic: Goin' Metric
Roy Martin (fadedred) -- 2/4/2011, 6:56 pm
Re: Off Topic: Goin' Metric
Will Clarke -- 2/5/2011, 12:07 am
Re: Off Topic: Goin' Metric
Roy Martin (fadedred) -- 2/5/2011, 9:25 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/5/2011, 10:32 am
Re: Off Topic: Goin' Metric
Roy Martin (fadedred) -- 2/5/2011, 11:59 am
Re: Off Topic: Goin' Metric
Robert N Pruden -- 2/7/2011, 12:30 pm
I can't read any more metric conv. posts...
Robert N Pruden -- 2/7/2011, 12:50 pm
Re: I can't read any more metric conv. posts...
Kirk Fredericks - Farback Carpentry and Automation -- 2/7/2011, 1:25 pm
Re: I can't read any more metric conv. posts...
Bill Hamm -- 2/7/2011, 2:07 pm
Just one more
Ian Johnson -- 2/8/2011, 4:34 am
Re: I can't read any more metric conv. posts...
Palle Dam -- 2/8/2011, 5:28 pm
Re: I can't read any more metric conv. posts...
Bill Hamm -- 2/9/2011, 12:43 am
Re: I can't read any more metric conv. posts... *PIC*
Tom Yost -- 2/14/2011, 12:39 pm