Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: R/C pushrod
By:Bill Hamm
Date: 2/3/2011, 7:48 pm
In Response To: Re: R/C pushrod *PIC* (Tom Yost)

: Clayton,

: Here's how I do it. Particle board is under the construction paper
: to hold the pins.
: There are 2 pins at each offset point pressing against the nylon
: pushrod (sleeve in this case).
: No weights are required, though a pint of beer comes in handy.

: The pic shows a coaming, but cross sections are done the same
: way.... Tom

Lots easier with the lead dolphins, or in my case just simple lead weights with points on the ends to fit in the channel.

Kinda fun casting lead, kinda dangerous too.

Bill H.

Messages In This Thread

Off Topic: Goin' Metric
John Caldeira -- 2/2/2011, 12:19 am
Re: Off Topic: Goin' Metric
JohnK -- 2/2/2011, 4:38 am
Re: Off Topic: Goin' Metric
Doug S -- 2/2/2011, 8:26 am
Re: Off Topic: Goin' Metric
Damian wentzel -- 2/2/2011, 9:19 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 1:51 am
Re: Off Topic: Goin' Metric
Richard Hayes -- 2/2/2011, 10:05 am
Re: Off Topic: Goin' Metric
Al Edie -- 2/2/2011, 11:49 am
Re: Off Topic: Goin' Metric
Mike Savage -- 2/2/2011, 1:03 pm
Re: Off Topic: Goin' Metric
Paul G. Jacobson -- 2/2/2011, 4:34 pm
Re: Off Topic: Goin' Metric
John Caldeira -- 2/2/2011, 9:10 pm
Re: Off Topic: Goin' Metric
Niven Paine -- 2/3/2011, 2:07 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 2:16 am
Re: Off Topic: Goin' Metric
Niven Paine -- 2/3/2011, 4:29 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 8:46 am
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 2:21 am
Re: Off Topic: Goin' Metric
Chris Richer -- 2/3/2011, 9:29 am
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 9:54 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 2:09 am
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 2:26 am
Re: Off Topic: Goin' Metric
Robert N Pruden -- 2/7/2011, 12:44 pm
Off Topic: Goin' with Yost measurements
Paul G. Jacobson -- 2/3/2011, 3:25 am
Re: Off Topic: Goin' with Yost measurements
Bill Hamm -- 2/3/2011, 8:48 am
Re: Off Topic: Goin' with Yost measurements *PIC*
Tom Yost -- 2/3/2011, 9:21 am
R/C pushrod
Doug S -- 2/3/2011, 1:29 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 3:29 pm
Re: R/C pushrod
Doug S -- 2/3/2011, 3:44 pm
Re: R/C pushrod
Les Cheeseman -- 2/3/2011, 3:47 pm
Re: R/C pushrod
Doug S -- 2/3/2011, 4:29 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 5:43 pm
Re: R/C pushrod *PIC*
Tom Yost -- 2/3/2011, 6:06 pm
Re: R/C pushrod
Clayton Plunkett -- 2/3/2011, 6:12 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 7:00 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 7:03 pm
Re: R/C pushrod
Clayton Plunkett -- 2/3/2011, 7:23 pm
Re: R/C pushrod *PIC*
Tom Yost -- 2/3/2011, 7:35 pm
Re: R/C pushrod
Randy Echtinaw -- 2/3/2011, 7:45 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 7:48 pm
Re: R/C pushrod
Bill Hamm -- 2/3/2011, 7:50 pm
Re: Off Topic: Goin' with Yost measurements
Robert N Pruden -- 2/7/2011, 12:34 pm
Re: Off Topic: Goin' with Yost measurements
Bill Hamm -- 2/8/2011, 12:39 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 2:04 am
Re: Off Topic: Goin' Metric
Paul G. Jacobson -- 2/3/2011, 3:18 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 1:53 am
Re: Off Topic: Goin' Metric
Richard Hayes -- 2/3/2011, 7:30 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 8:51 am
Re: Off Topic: Goin' Metric
Richard Hayes -- 2/3/2011, 1:33 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 3:32 pm
Re: Off Topic: Goin' Metric
Robert N Pruden -- 2/7/2011, 12:39 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/8/2011, 12:39 am
Re: Off Topic: Goin' Metric
dave -- 2/2/2011, 12:46 pm
Re: Off Topic: Goin' Metric
Paul G. Jacobson -- 2/2/2011, 4:37 pm
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/3/2011, 12:04 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 2:23 am
Re: Off Topic: Goin' Metric
Phil Nelson -- 2/3/2011, 2:34 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 8:54 am
Re: Off Topic: Goin' Metric
Phil Nelson -- 2/3/2011, 8:39 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 6:59 am
Re: Off Topic: Goin' Metric
Phil Nelson -- 2/4/2011, 7:17 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 7:23 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 7:31 am
Re: Off Topic: Goin' Metric
Bushwacker -- 2/4/2011, 10:48 am
Re: Off Topic: Goin' Metric
Todd O -- 2/4/2011, 11:29 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 12:28 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 7:17 am
Re: Off Topic: Goin' Metric
Phil Nelson -- 2/4/2011, 6:54 pm
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 3:13 am
Re: Off Topic: Goin' Metric
Alex Ferguson -- 2/3/2011, 4:31 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 8:56 am
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 10:05 am
Re: Off Topic: Goin' Metric
dhwdaniels -- 2/3/2011, 5:37 am
Re: Off Topic: Goin' Metric
dhwdaniels -- 2/3/2011, 5:29 am
Re: Off Topic: Goin' Metric
Mike Savage -- 2/3/2011, 6:28 am
Re: Off Topic: Goin' Metric
Les Cheeseman -- 2/3/2011, 8:48 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/3/2011, 9:00 am
Re: Off Topic: Goin' Metric
Les Cheeseman -- 2/3/2011, 9:06 am
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/3/2011, 11:28 am
Re: Off Topic: Goin' Metric
Mike Savage -- 2/3/2011, 1:28 pm
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/3/2011, 3:07 pm
Re: Off Topic: Goin' Metric
John Caldeira -- 2/3/2011, 5:56 pm
Re: Off Topic: Goin' Metric
Ian Johnson -- 2/4/2011, 12:48 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 7:12 am
Re: Off Topic: Goin' Metric
Mike Savage -- 2/4/2011, 1:15 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/4/2011, 1:38 pm
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/4/2011, 11:51 pm
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/5/2011, 5:35 am
Re: Off Topic: Goin' Metric
ancient kayaker -- 2/5/2011, 12:58 pm
Re: Off Topic: Goin' Metric
Charles Leach -- 2/5/2011, 1:53 pm
Re: Off Topic: Goin' Metric
Les Cheeseman -- 2/4/2011, 11:07 am
Re: Off Topic: Goin' Metric
Roy Martin (fadedred) -- 2/4/2011, 6:56 pm
Re: Off Topic: Goin' Metric
Will Clarke -- 2/5/2011, 12:07 am
Re: Off Topic: Goin' Metric
Roy Martin (fadedred) -- 2/5/2011, 9:25 am
Re: Off Topic: Goin' Metric
Bill Hamm -- 2/5/2011, 10:32 am
Re: Off Topic: Goin' Metric
Roy Martin (fadedred) -- 2/5/2011, 11:59 am
Re: Off Topic: Goin' Metric
Robert N Pruden -- 2/7/2011, 12:30 pm
I can't read any more metric conv. posts...
Robert N Pruden -- 2/7/2011, 12:50 pm
Re: I can't read any more metric conv. posts...
Kirk Fredericks - Farback Carpentry and Automation -- 2/7/2011, 1:25 pm
Re: I can't read any more metric conv. posts...
Bill Hamm -- 2/7/2011, 2:07 pm
Just one more
Ian Johnson -- 2/8/2011, 4:34 am
Re: I can't read any more metric conv. posts...
Palle Dam -- 2/8/2011, 5:28 pm
Re: I can't read any more metric conv. posts...
Bill Hamm -- 2/9/2011, 12:43 am
Re: I can't read any more metric conv. posts... *PIC*
Tom Yost -- 2/14/2011, 12:39 pm