Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

thanks for many good ideas
By:Randy Knauff
Date: 2/8/2011, 11:19 am
In Response To: Re: S&G: 90 degree corners (Al Edie)

: So, just curious, what adventures do you have in mind with your
: take apart boat?

: Good luck,

: Best regards,

: Allan Edie

I'll set up some small section pieces to try several of the suggested ideas.
The boat will use the foot drive units from Hobie and be able to be configured as a single or double.
Randy

Messages In This Thread

S&G: 90 degree corners
Randy Knauff -- 2/6/2011, 1:16 pm
Re: S&G: 90 degree corners
Bill Hamm -- 2/6/2011, 1:58 pm
Re: S&G: 90 degree corners
Bill Hamm -- 2/6/2011, 2:03 pm
Re: S&G: 90 degree corners *PIC*
Paul G. Jacobson -- 2/7/2011, 5:39 am
Re: S&G: 90 degree corners
John Caldeira -- 2/7/2011, 10:24 am
Re: S&G: 90 degree corners *PIC*
Paul G. Jacobson -- 2/7/2011, 10:46 pm
Re: S&G: 90 degree corners
Bill Hamm -- 2/8/2011, 12:29 am
Re: S&G: 90 degree corners
dave g -- 2/6/2011, 2:18 pm
Re: S&G: 90 degree corners
Bill Hamm -- 2/6/2011, 3:58 pm
Re: S&G: 90 degree corners
dave g -- 2/6/2011, 8:16 pm
Re: S&G: 90 degree corners
Bill Hamm -- 2/7/2011, 12:08 am
Re: S&G: 90 degree corners
Wesley Ewell -- 2/6/2011, 4:38 pm
Re: S&G: 90 degree corners
Al Edie -- 2/6/2011, 10:17 pm
thanks for many good ideas
Randy Knauff -- 2/8/2011, 11:19 am
Re: S&G: 90 degree corners
John Caldeira -- 2/6/2011, 10:46 pm
Re: S&G: 90 degree corners
Bill Hamm -- 2/7/2011, 12:14 am
Re: S&G: 90 degree corners
mick allen -- 2/7/2011, 1:04 am
Re: S&G: 90 degree corners
Eric -- 2/7/2011, 1:51 pm