Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: SOF fabric and finish options
By:Paul G. Jacobson
Date: 2/28/2011, 1:35 pm

: So.......the clear vinyl skinning would go much the same as Yost's
: PVC skinning method yes?......

Yes. Except he generally uses glue, and glues the deck to the hull. With a wood-framed boat you can use glue if you want, but it is faster to secure the hull and then the deck to the gunwale strips with staples. Stpales are not an option with an aluminum frame on a folder. With either style you could sew the skin on. Use about 4 stitches to the inch with the clear vinyl if you sew it by hand. That is about the same spacing as with a heavy cloth.

: I'm not too woried about punctures or abrasions. I can be careful
: with the boat, and will accept that in needs a little TLC. The
: "COOL" factor will outweigh the futzyness.......at
: least for awhile. If I find that it's too fragile, then I'll
: just rip it off and go with something else.

when the skin is stapled on, and the overlap of deck and hull material, with the row of staples, is covered with a neat rub strip, all the fastenings are hidden. the cool factor is enhanced. The frame can be easily seen, and so can the paddler. These boats are chick magnets.

As for fragile. Not really a big problem. Sevylor inflatable boats are plenty durable, and their least-expensive boats are made from thin, unreinforced vinyl of about this thickness. Those last several years. No reason these shouldn't last about half as long as cotton duck and paint. In the event of punctures the vinyl is very quick to patch with clear tape, such as one owuld repair a vinyl swimming pool liner. Some of those tape patches could be considered permanent repairs. If no using tape, then a scrap of the clear vinyl could be applied with clear vinyl cement for a permanent repair. the drying/hardening time for such an adhesive is about an hour. Pinholes can be repair with just a drop of the cement alone.

I'm not sure what the state licensing boards will think about registering these boats, though. You might rn into some problems if your state requires an inspection before issuing tags. If they do, mention to the inspector that the inflatables, which most states WILL register are made of the same material. If you just have to mail in a form, as we do in Illinois, then just check the box for wood or plastic construction, or do both.

PGJ

Messages In This Thread

Skin-on-Frame: SOF fabric and finish options
Todd O -- 2/25/2011, 1:21 pm
Re: Skin-on-Frame: SOF fabric and finish options
Thomas Duncan -- 2/25/2011, 2:16 pm
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 2/25/2011, 2:37 pm
Re: Skin-on-Frame: sinew vs floss
Thomas Duncan -- 2/25/2011, 2:55 pm
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 2/25/2011, 2:35 pm
Re: Skin-on-Frame: SOF fabric and finish options
Paul G. Jacobson -- 2/25/2011, 3:13 pm
Re: Skin-on-Frame: SOF fabric and finish options
Brian Nystrom -- 2/26/2011, 8:15 am
Re: Skin-on-Frame: SOF fabric and finish options
Paul G. Jacobson -- 2/26/2011, 8:28 am
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 2/26/2011, 9:25 am
Re: Skin-on-Frame: SOF fabric and finish options
Todd O -- 2/27/2011, 12:37 am
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 2/27/2011, 1:13 am
Re: Skin-on-Frame: SOF fabric and finish options
Paul G. Jacobson -- 2/27/2011, 1:37 am
Re: Skin-on-Frame: SOF fabric and finish options
Tim Abbott -- 2/27/2011, 10:34 am
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 2/28/2011, 12:23 am
Re: Skin-on-Frame: SOF fabric and finish options
Todd O -- 2/28/2011, 12:08 pm
Re: Skin-on-Frame: SOF fabric and finish options
Paul G. Jacobson -- 2/28/2011, 1:35 pm
Re: Skin-on-Frame: SOF fabric and finish options
Todd O -- 2/28/2011, 2:41 pm
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 3/1/2011, 2:21 am
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 3/1/2011, 2:20 am
Re: Skin-on-Frame: SOF fabric and finish options
Paul G. Jacobson -- 3/1/2011, 4:14 am
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 3/1/2011, 11:08 am
Re: Skin-on-Frame: sewing or gluing vinyl
Paul G. Jacobson -- 3/2/2011, 1:11 am
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 3/1/2011, 2:16 am
Re: Skin-on-Frame: SOF fabric and finish options
Todd O -- 3/1/2011, 9:37 am
Re: Skin-on-Frame: SOF fabric and finish options
Bill Hamm -- 3/2/2011, 1:38 am
Re: Skin-on-Frame: SOF fabric and finish options
Paul G. Jacobson -- 2/27/2011, 1:21 am
Re: Skin-on-Frame: SOF fabric and finish options
Dave Gentry -- 2/25/2011, 6:29 pm