: I decided to round the edges of my lower bow with a router, and as
: I went around it with a handheld one, the guide slipped as it
: approached the drop-off of the middle lamination and dug a
: little deeper into the wood. You can see on the image where I
: promptly stopped cutting, so the last few millimeters still have
: a square edge.

: Obviously it's not too easy putting wood back on, but I image this
: sort of thing has happened on other boat parts.. Any suggestions
: on how to fix?

: Sorry for the blurriness, phone camera.

Hi Stephen,
You could leave it alone until the stripping is just about done on the hull and at that point, take off even more and put a contrasting, harder timber along the edge of the piece.

Mike Savage
South West Cork