Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Spray varnish *PIC*
By:Dave Houser
Date: 4/20/2011, 8:02 pm
In Response To: Re: Tools: Spray varnish *PIC* (mtkayak (Mike Trutwin))

: If you are looking for a nice smooth glossy finish, think about
: sanding and buffing your last coat of varnish. I sanded between
: coats of varnish with w/d 1000. After the last coat I sanded
: with 2000. After that I went with 3M Finess-it II. I purchased a
: couple of foam buffing pads to attach via hook&loop to my
: ROS. worked slick! I also tried using Novus II plastic polish.
: It seemed to do about the same job as the finess-it. It seems
: there is debate about buffing the varnish but I liked the
: results. Much smoother and very glossy.

I polished the deck on my first two kayaks. Since the kayaks I build are for my use and I use them hard I quit polishing. The perfect finish really only shows when the kayak is dry and that is against my basic nature. I used Meguiar's to polish Zspar Captains Varnish.

http://www.kayakforum.com/cgi-bin/Building/Archive60.pl?review=63729

Messages In This Thread

Tools: Spray varnish
Kim Haubert -- 4/17/2011, 12:09 am
Re: Tools: Spray varnish
Bill Hamm -- 4/17/2011, 12:59 am
Re: Tools: Spray varnish
Kim Haubert -- 4/17/2011, 12:49 pm
Re: Tools: Spray varnish
Joe whitman -- 4/17/2011, 11:04 am
Re: Tools: Spray varnish
Mike Bielski -- 4/17/2011, 11:42 am
Re: Tools: Spray varnish
Bill Hamm -- 4/17/2011, 2:09 pm
Re: Tools: Spray varnish
Etienne Muller - ireland -- 4/17/2011, 2:18 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/17/2011, 2:21 pm
Re: Tools: Spray varnish
Nick Riccardi -- 4/17/2011, 2:45 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/17/2011, 4:00 pm
Re: Tools: Spray varnish
Nick Riccardi -- 4/17/2011, 5:28 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/18/2011, 12:14 am
Re: Tools: Spray varnish
Steve Hill -- 4/19/2011, 8:10 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/20/2011, 1:39 am
Re: Tools: Spray varnish
Steve Hill -- 4/20/2011, 2:52 am
Re: Tools: Spray varnish
Bill Hamm -- 4/21/2011, 12:52 am
Re: Tools: Spray varnish
Steve Hill -- 4/21/2011, 5:23 am
Re: Tools: Spray varnish
Bill Hamm -- 4/21/2011, 6:15 am
Re: Tools: Spray varnish *PIC*
mtkayak (Mike Trutwin) -- 4/18/2011, 1:41 pm
Re: Tools: Spray varnish
Mike Savage -- 4/18/2011, 3:28 pm
Re: Tools: Spray varnish
Ian Cummins -- 4/18/2011, 4:17 pm
Re: Tools: Spray varnish
mtkayak (Mike Trutwin) -- 4/18/2011, 4:45 pm
Re: Tools: Spray varnish
Dan Caouette (CSFW) -- 4/18/2011, 6:05 pm
Re: Tools: Spray varnish
Mike Bielski -- 4/18/2011, 7:47 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/19/2011, 1:37 am
Re: Tools: Spray varnish *PIC*
Dave Houser -- 4/20/2011, 8:02 pm
Re: Tools: Spray varnish
Etienne Muller - ireland -- 4/21/2011, 4:13 am
Re: Tools: Spray varnish
Bill Hamm -- 4/21/2011, 6:16 am