Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: bending 1st bow strip?
By:Randy Echtinaw
Date: 5/19/2011, 11:09 am
In Response To: Re: Strip: bending 1st bow strip? (Andrew T)

: Thanks for the tips guys.

: So with the heat gun method.
: After the strip is heated and bent will the strip hold that shape?
: Or will it try to straighten itself out once it cools down?
: Sorry if that's a stupid question...

To add my $ .02 to the consensus. I bent all the strips on my Guillemot using a heat gun with no problems. I used small "C" clamps and the horse shoe shaped plywood boards to clamp the strip at each station - top and bottom of the strip. As the bend progressed I heated and bent the strip by hand. As the strip formed to each station my wife would add additional clamps until the strip was formed and clamped to the forms. After cooling the clamps were removed and there was some spring back of the strip but this was not a problem when glueing it in place. We were able to get the curve and the twist into the strips.
The only problem we encountered was burning the tape off of the forms but easily replaceable :)
Randy

Messages In This Thread

Strip: bending 1st bow strip? *PIC*
Andrew T -- 5/18/2011, 11:38 pm
Re: Strip: bending 1st bow strip? *NM* *PIC*
Andrew T -- 5/18/2011, 11:39 pm
Re: Strip: bending 1st bow strip? *NM* *PIC*
Andrew T -- 5/18/2011, 11:39 pm
Re: Strip: bending 1st bow strip?
PatrickC -- 5/19/2011, 10:36 am
Re: Strip: bending 1st bow strip?
Noel Bennett -- 5/19/2011, 12:06 am
Re: Strip: bending 1st bow strip?
Allan -- 5/19/2011, 1:28 am
Re: Strip: bending 1st bow strip?
JohnK -- 5/19/2011, 12:44 am
Re: Strip: bending 1st bow strip?
dave g -- 5/19/2011, 12:54 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/19/2011, 1:54 am
Re: Strip: bending 1st bow strip?
Joy -- 5/19/2011, 3:50 pm
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/19/2011, 9:06 pm
Re: Strip: bending 1st bow strip?
Mike Savage -- 5/20/2011, 8:58 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/20/2011, 10:11 am
Re: Strip: bending 1st bow strip?
george jung -- 5/20/2011, 9:46 pm
Re: Strip: bending 1st bow strip?
Al Edie -- 5/21/2011, 1:04 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/21/2011, 7:39 am
Re: Strip: bending 1st bow strip?
ancient kayaker -- 5/20/2011, 5:40 pm
Re: Strip: bending 1st bow strip? *PIC*
Andrew T -- 5/22/2011, 7:49 pm
Re: Strip: bending 1st bow strip? *NM* *PIC*
Andrew T -- 5/22/2011, 7:53 pm
Re: Strip: bending 1st bow strip? *NM* *PIC*
Andrew T -- 5/22/2011, 7:56 pm
Re: Strip: bending 1st bow strip?
Randy Echtinaw -- 5/22/2011, 9:12 pm
Re: Strip: bending 1st bow strip?
dave g -- 5/22/2011, 11:43 pm
Re: Strip: bending 1st bow strip?
Andrew T -- 5/23/2011, 4:29 pm
Re: Strip: bending 1st bow strip?
ancient kayaker -- 5/24/2011, 1:10 pm
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/25/2011, 1:51 am
Re: Strip: bending 1st bow strip?
ancient kayaker -- 5/25/2011, 10:10 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/25/2011, 1:34 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/22/2011, 8:33 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/19/2011, 8:47 am
Re: Strip: bending 1st bow strip?
Andrew T -- 5/19/2011, 9:39 am
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/19/2011, 9:54 am
Re: Strip: bending 1st bow strip?
Randy Echtinaw -- 5/19/2011, 11:09 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/19/2011, 9:08 pm
Re: Strip: bending 1st bow strip?
Bryan Kapteyn -- 5/20/2011, 10:53 am
Re: Strip: bending 1st bow strip?
Randy Echtinaw -- 5/20/2011, 5:05 pm
Re: Strip: bending 1st bow strip?
Etienne Muller - ireland -- 5/21/2011, 3:46 am
Re: Strip: bending 1st bow strip?
Al Edie -- 5/19/2011, 11:32 am
Re: Strip: bending 1st bow strip?
Joe Whitman -- 5/19/2011, 12:37 pm
Re: Strip: bending 1st bow strip?
Andrew T -- 5/19/2011, 2:11 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/19/2011, 3:41 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/19/2011, 3:42 pm
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/19/2011, 9:10 pm
Re: Strip: bending 1st bow strip?
Al Edie -- 5/19/2011, 9:11 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/20/2011, 9:26 am
Re: Strip: bending 1st bow strip?
Al Edie -- 5/21/2011, 12:44 am