Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: epoxy cure time
By:Bill Hamm
Date: 6/11/2011, 1:19 pm
In Response To: Re: Strip: epoxy cure time (Nick Riccardi)

: Hi Bill, I really appreciate your help I have trouble with all
: things computerized. Also I would like your feedback on the
: Redfish seat
: I had an old sit on top seat that I modified but does not work,
: after a 20 mile paddle it wore the skin off my back and is very
: painful
: my wife gave me the O K for the Redfish at 145.00 but being semi
: retired it seems lavish. I'm about one inch from ordering but
: still holding. You have been a great source of information building
: kayaks and want to thank you The very best Nick R.

Hi Nick,

Ok, remembered to look. When you see your picture on Photobucket, below each photo is a series of addresses, just click on the "direct link" button and it'll copy that address. Paste that to the "optional image URL: " block below where you type to reply to a post, but first eliminate the "http:// ", there can only be one in the address. Then hit the preview button and see if it works, if it does then hit the post button.

Bill H.

Messages In This Thread

Strip: epoxy cure time
Nick Riccardi -- 6/8/2011, 6:03 pm
Re: Strip: epoxy cure time
JohnK -- 6/8/2011, 7:47 pm
Re: Strip: epoxy cure time
Bill Hamm -- 6/10/2011, 1:32 am
Re: Strip: epoxy cure time
Nick Riccardi -- 6/10/2011, 2:16 pm
Re: Strip: epoxy cure time
Bill Hamm -- 6/11/2011, 1:27 am
Re: Strip: epoxy cure time
Bill Hamm -- 6/11/2011, 1:19 pm