Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Adding flotation
By:Eric Mattison
Date: 10/24/2011, 7:41 pm
In Response To: Re: Skin-on-Frame: Adding flotation (jim adams)

: Eric,
: Thanks for the tip. I'm familiar with Yostwerks. I'll check it out.
: When you say seasock,is that the same thing as a spray-skirt?
: The cockpit of the Chuckanut 12 probably won't take one, but the
: SeeBee will.
: Jim. A.

I agree with you on the Chuchanut 12. Given the dimensions, set of float bags is really the solution. For the SeaBee, you can certainly use a seasock.

A seasock is almost exactly what it sounds like; it is a sock that slides down inside the cockpit and prevents water from entering the boat. It does nothing to keep the paddler dry, but if properly installed should keep the boat from flooding. This page has a pretty good description.

http://www.blackdogkayaks.com/seasock.html

Eric M.

Messages In This Thread

Skin-on-Frame: Adding flotation
James Adams -- 10/24/2011, 11:49 am
Re: Skin-on-Frame: Adding flotation
StephenHJ -- 10/24/2011, 12:02 pm
Re: Skin-on-Frame: Adding flotation
James Adams -- 10/24/2011, 12:07 pm
Re: Skin-on-Frame: Adding flotation
Eric Mattison -- 10/24/2011, 5:44 pm
Re: Skin-on-Frame: Adding flotation
jim adams -- 10/24/2011, 5:50 pm
Re: Skin-on-Frame: Adding flotation
Eric Mattison -- 10/24/2011, 7:41 pm
Re: Skin-on-Frame: Adding flotation
jim adams -- 10/24/2011, 8:40 pm
Re: Skin-on-Frame: Adding flotation
Scott Shurlow -- 10/25/2011, 12:24 am
Re: Skin-on-Frame: Adding flotation
Dave Gentry -- 10/25/2011, 9:51 am
Re: Skin-on-Frame: Adding flotation
Matthias -- 10/28/2011, 2:17 am
Re: Skin-on-Frame: Adding flotation
Jim -- 10/28/2011, 9:24 am
Re: Skin-on-Frame: Adding flotation
davekoz -- 10/28/2011, 10:37 am
Re: Skin-on-Frame: Adding flotation
Matthias -- 10/29/2011, 12:28 pm
Re: Skin-on-Frame: Adding flotation
Ken Blanton -- 10/29/2011, 6:03 pm