Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: retreating epoxy on later coat
By:Mike Savage
Date: 12/21/2011, 8:46 am
In Response To: Epoxy: retreating epoxy on later coat (Wayne One (wwfloyd))

: Occasionally, when doing subsequent coats of epoxy, I'll get an
: area where the epoxy retreats, and leaves an uncovered dimple,
: or irregular shape. Got it tonight, coating a paddle. I'd like
: to figure out why, before beginning another boat.

: Tonight, and, I think in the past, I had done some 220 grit
: sanding, then wiped it down with denatured alcohol. It had sat
: at least an hour before I applied the epoxy. I'm using Maas
: slow, in a shop at about 70 degrees.

: 2nd question. When I had used System 3, the guide was to do
: subsequent coats within 72 hours, to avoid having to sand. Is
: that OK for Maas, too?

: Thanks

Hi Wayne,
It's likely blush, as others have said, or contaminants from the alcohol, wash it down with water. One thing about water is that it will behave in a similar manner as the fresh epoxy when it's on contaminated epoxy, it doesn't sit evenly on the surface. A clean surface will look uniformly wet.

Mike Savage
South West Cork

Messages In This Thread

Epoxy: retreating epoxy on later coat
Wayne One (wwfloyd) -- 12/19/2011, 9:29 pm
Re: Epoxy: retreating epoxy on later coat
Rod Tait (Orca Boats) -- 12/19/2011, 11:41 pm
Re: Epoxy: retreating epoxy on later coat
Bill Hamm -- 12/20/2011, 1:07 am
Re: Epoxy: retreating epoxy on later coat
Etienne Muller -- 12/20/2011, 5:58 am
Re: Epoxy: retreating epoxy on later coat
Wayne One (wwfloyd) -- 12/20/2011, 8:09 am
Re: Epoxy: retreating epoxy on later coat
Jay Babina -- 12/20/2011, 9:54 am
Re: Epoxy: retreating epoxy on later coat
Bill Hamm -- 12/21/2011, 2:02 am
Re: Epoxy: retreating epoxy on later coat
Rod Tait (Orca Boats) -- 12/20/2011, 11:30 am
Re: Epoxy: retreating epoxy on later coat
Bill Hamm -- 12/21/2011, 2:04 am
Re: Epoxy: retreating epoxy on later coat
Rob Macks/Laughing Loon CC&K -- 12/20/2011, 8:12 am
Re: Epoxy: retreating epoxy on later coat
Wayne One (wwfloyd) -- 12/20/2011, 9:38 am
Re: Epoxy: retreating epoxy on later coat
Mike Bielski -- 12/20/2011, 12:59 pm
Re: Epoxy: retreating epoxy on later coat
Dave Houser -- 12/20/2011, 3:43 pm
Re: Epoxy: retreating epoxy on later coat
Douglas Lee -- 12/21/2011, 1:43 pm
Re: Epoxy: retreating epoxy on later coat
Bill Hamm -- 12/21/2011, 2:05 am
Re: Epoxy: retreating epoxy on later coat
Etienne Muller -- 12/21/2011, 4:55 am
Re: Epoxy: retreating epoxy on later coat
Mike Bielski -- 12/21/2011, 11:44 am
Re: Epoxy: retreating epoxy on later coat
Mike Savage -- 12/21/2011, 8:46 am
Re: Epoxy: retreating epoxy - thanks guys
Wayne One (wwfloyd) -- 12/21/2011, 5:54 pm