Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Here we go... wish me luck
By:Marc Upchurch
Date: 11/30/2016, 10:38 am
In Response To: Re: Strip: Here we go... wish me luck (Steve Solomon)

Sorry to keep being a know it all.
But ---- Clamps are really not a good thing.
I kept clamping to close gaps until I noticed that after several rows of strips, the last strip was no longer straight.
It had waves up and down which meant I finally could not give enough force to bend the next one in place.
Then I had to either try to sand the last strip straight while on the form, or sand that wave into the next strip I fitted.
Neither worked well. Later I realized I could have removed the set of glued up strips from the forms as a whole and sand on the bench away from the forms - that works better.

But better still is to learn to fit each strip to the previous such that it takes very little pressure to get no gaps.
That's why I finally took Uncle Nick's advise and use masking tape to hold the strips in place. If that is not enough to close up gaps your fit is not good enough.

Sounds bad, but once you get it done on one strip, the next ones are progressively easier.
At the end of the stripping you will be doing it with very little effort.

Messages In This Thread

Strip: Here we go... wish me luck
Steve Solomon -- 10/27/2016, 4:47 pm
Re: Strip: Here we go... wish me luck
JohnAbercrombie -- 10/27/2016, 5:09 pm
Re: Strip: Here we go... wish me luck
Bill Hamm -- 10/28/2016, 12:11 am
Re: Strip: Here we go... wish me luck
Steve Solomon -- 10/28/2016, 9:55 am
Re: Strip: Here we go... wish me luck
Bill Hamm -- 10/29/2016, 1:04 am
Re: Strip: Here we go... wish me luck
Steve Solomon -- 11/28/2016, 10:18 am
Re: Strip: Here we go... wish me luck
upchurchmr -- 11/29/2016, 8:42 pm
Re: Strip: Here we go... wish me luck
Steve Solomon -- 11/30/2016, 9:18 am
Re: Strip: Here we go... wish me luck
Marc Upchurch -- 11/30/2016, 9:29 am
Re: Strip: Here we go... wish me luck
Steve Solomon -- 11/30/2016, 10:07 am
Re: Strip: Here we go... wish me luck
Marc Upchurch -- 11/30/2016, 10:38 am
Re: Strip: Here we go... wish me luck
Steve Solomon -- 11/30/2016, 11:11 am
Re: Strip: Here we go... wish me luck
Randy -- 11/30/2016, 12:30 pm
Re: Strip: Here we go... wish me luck
upchurchmr -- 11/30/2016, 12:32 pm
Re: Strip: Here we go... wish me luck
Steve Solomon -- 11/30/2016, 1:18 pm
Re: Strip: Here we go... wish me luck
Rob Macks/Laughing Loon CC&K -- 11/30/2016, 1:56 pm
Re: Strip: Here we go... wish me luck
Steve Solomon -- 11/30/2016, 2:38 pm
Re: Strip: Here we go... wish me luck
Rob Macks/Laughing Loon CC&K -- 11/30/2016, 3:06 pm
Re: Strip: Here we go... wish me luck
JohnAbercrombie -- 11/30/2016, 3:21 pm
Re: Strip: Here we go... wish me luck
Steve Solomon -- 11/30/2016, 3:44 pm
Re: Strip: Here we go... wish me luck
Bill Hamm -- 12/1/2016, 1:14 am
Re: Strip: Here we go... wish me luck
JohnAbercrombie -- 12/1/2016, 1:52 am
Re: Strip: Here we go... wish me luck
Etienne Muller -- 12/1/2016, 4:43 am
I was talking about the Hull
upchurchmr -- 11/30/2016, 4:38 pm
Re: I was talking about the Hull
Steve Solomon -- 11/30/2016, 4:54 pm
Re: Strip: Here we go... wish me luck
Nick Schade - Guillemot Kayaks -- 11/30/2016, 3:21 pm
Re: Strip: Here we go... wish me luck
JohnAbercrombie -- 11/30/2016, 3:27 pm
Re: Strip: Here we go... wish me luck
Bill Hamm -- 12/1/2016, 1:16 am
Re: Strip: Here we go... wish me luck
Marc Upchurch -- 11/30/2016, 1:57 pm
Re: Strip: Here we go... wish me luck
Steve Solomon -- 11/30/2016, 2:16 pm
Re: Strip: Here we go... wish me luck
Marc Upchurch -- 11/30/2016, 3:18 pm
Re: Strip: Here we go... wish me luck
JohnAbercrombie -- 11/30/2016, 3:22 pm
Re: Strip: Here we go... wish me luck
jaybabina -- 11/30/2016, 3:22 pm
Re: Strip: Here we go... wish me luck
Bill Hamm -- 12/1/2016, 1:20 am