Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: 2 X 4 's into strips
By:Marc Upchurch
Date: 1/4/2017, 11:59 am
In Response To: Re: Strip: 2 X 4 's into strips (Steve Solomon)

Nice theories.

Make some test strips.

Never had a problem with PVA sucking into the pores. Its too thick for much of that.
I wouldn't do pva for a butt joint on the bench. The limited area for gluing means you really need to let it fully cure to possibly get enough strength, say 2 -5 days, IMHO.

You are making this too complicated.

Go watch Nick Shades videos on building kayaks.
He actually makes money at this.
Or go to the Laughing Loon website.
They have somewhat different technique, but both do this professionally.

Messages In This Thread

Strip: 2 X 4 's into strips
Richard Mertins -- 1/3/2017, 6:41 pm
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/3/2017, 8:36 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/3/2017, 11:54 pm
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/4/2017, 7:52 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/4/2017, 9:53 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 11:07 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/4/2017, 11:59 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 12:56 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/5/2017, 12:23 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/5/2017, 7:05 am
Overthinking
Curtis Fisher -- 1/5/2017, 8:16 pm
Re: Overthinking
Steve Solomon -- 1/6/2017, 12:12 am
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/6/2017, 3:12 am
Re: Strip: 2 X 4 's into strips
David Wyse -- 1/4/2017, 12:01 pm
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 9:22 am
Re: Strip: 2 X 4 's into strips
Nick R. -- 1/4/2017, 4:18 pm
Re: Strip: 2 X 4 's into strips
Rob Macks/Laughing Loon CC&K -- 1/5/2017, 9:06 am
Re: Strip: 2 X 4 's into strips
JohnAbercrombie -- 1/7/2017, 11:16 am
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/7/2017, 11:34 am
Re: Strip: 2 X 4 's into strips
Rob Macks/Laughing Loon CC&K -- 1/7/2017, 11:50 am
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/8/2017, 7:32 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/8/2017, 8:55 am
Re: Strip: 2 X 4 's into strips
dave koslow -- 1/9/2017, 2:11 pm
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/9/2017, 5:18 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/9/2017, 1:20 am