Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Using a roller for automotive clear
By:Paul T
Date: 1/6/2017, 12:54 pm

The directions call for only about 10 minutes between coats.

Each manufacturer of automotive clears have a schedule for applying their products, and usually there are a range of different hardeners and clears that are intended for different types of applications and environments.
I've used most of them through the decades in my painting career.

I used Glasurit clear for test #1 and it was a low VOC clear (less solvent) which I felt should have allowed greater material transfer, but more tests will have to done.

Messages In This Thread

Material: Using a roller for automotive clear
Paul T -- 12/31/2016, 5:20 pm
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 12/31/2016, 7:07 pm
Re: Material: Using a roller for automotive clear
Mike Bielski -- 12/31/2016, 8:51 pm
Re: Material: Using a roller for automotive clear
Paul T -- 12/31/2016, 9:06 pm
Re: Material: Using a roller for automotive clear
Mike Bielski -- 1/1/2017, 9:53 am
Re: Material: Using a roller for automotive clear
JohnAbercrombie -- 1/1/2017, 10:19 am
Re: Material: Using a roller for automotive clear
Dan Caouette (CSCWC) -- 1/1/2017, 12:42 pm
Re: Material: Using a roller for automotive clear
Nick R. -- 1/1/2017, 2:41 pm
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/1/2017, 2:43 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/1/2017, 6:36 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/1/2017, 6:43 pm
Re: Material: Using a roller for automotive clear *PIC*
Paul T -- 1/4/2017, 8:12 pm
Re: Material: Using a roller for automotive clear
Bill Hamm -- 1/6/2017, 3:14 am
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/6/2017, 6:46 am
Re: Material: Using a roller for automotive clear *PIC*
Paul T -- 1/6/2017, 7:25 am
Re: Material: Using a roller for automotive clear
Dan Caouette (CSCWC) -- 1/6/2017, 10:02 am
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/6/2017, 11:04 am
Re: Material: Using a roller for automotive clear
Roy Martin -- 1/6/2017, 11:35 am
Re: Material: Using a roller for automotive clear
Paul T -- 1/6/2017, 12:54 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/6/2017, 12:41 pm