Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Strip: Damage repair *PIC*
By:Justin
Date: 8/30/2017, 11:44 am

I thought it might interest a few people to see how I repaired a close encounter with a pointy rock.

The damage, clean through the glass and about 3mm into the wood:

I taped a steel ruler onto the hull next to the damage, and used a box cutter with just a couple of mm of the blade showing to cut around the damaged area, one strip wide:

I then used a flat chisel to make a shallow hole:

Cut a piece of strip to fit the gap:

And glued it in:

Planed it flat (the plane is a Veritas Miniature, all I had handy)

Sanded it:

Cut a scrap of glass cloth to cover:

Wet it out and filled it:

And sanded it back flat (actually, I will have to wait a week or so for the epoxy to cure fully before I can sand it really smooth)

All in all a couple of hours easy work.

So go rock gardening, even in a fully (80kgs of gear and water) loaded North Star!

Yes Rob, my brand new one, second day in the water :-)

Justin

Messages In This Thread

Strip: Damage repair *PIC*
Justin -- 8/30/2017, 11:44 am
Re: Strip: Damage repair
Olli -- 8/30/2017, 12:26 pm
Re: Strip: Damage repair
scottbaxter -- 8/30/2017, 5:40 pm
Re: Strip: Damage repair
Laughing Loon CC&K -- 8/30/2017, 7:16 pm