Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: First strip build - first question
By:M A Bielski
Date: 10/6/2017, 10:30 pm
In Response To: Tools: First strip build - first question (Paul Harker)

I would have liked a better laser for aligning forms and checking the kayak on the strong back. If, like me, you are constantly reviewing your work to check and make sure it was right a good laser can be handy for checking things. There was even a company at one point who was selling pre-cut forms that included a small hole in each form so that you could shine a laser through them all for alignment.

Also- I built long boards for fairing the hull with sandpaper. If I were you and looking for expanding tools, I'd buy some of the foam longboards. They really are an improvement over my thin plywood.

m

Messages In This Thread

Tools: First strip build - first question
Paul Harker -- 10/6/2017, 5:46 pm
Re: Tools: First strip build - first question
Ken Blanton -- 10/6/2017, 7:08 pm
Re: Tools: First strip build - first question
GCole -- 10/6/2017, 7:25 pm
Re: Tools: First strip build - first question
anewhouse -- 10/6/2017, 9:06 pm
Re: Tools: First strip build - first question
M A Bielski -- 10/6/2017, 10:30 pm
Re: Tools: First strip build - first question
Dave ( of Calif.) -- 10/17/2017, 7:21 pm
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/6/2017, 11:26 pm
Re: Tools: First strip build - first question
Etienne Muller -- 10/7/2017, 4:42 am
Re: Tools: First strip build - first question
Etienne Muller -- 10/7/2017, 4:48 am
Re: Tools: First strip build - first question
Jay Babina -- 10/7/2017, 8:34 am
Re: Tools: First strip build - first question
Paul Harker -- 10/7/2017, 9:12 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/7/2017, 10:55 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/7/2017, 11:06 am
Re: Tools: First strip build - first question
M A Bielski -- 10/7/2017, 11:37 pm
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/8/2017, 1:48 am
Re: Tools: First strip build - first question
Bill Hamm -- 10/10/2017, 2:07 am
Re: Tools: First strip build - first question
M A Bielski -- 10/12/2017, 10:55 pm
Re: Tools: First strip build - first question
Phil -- 10/7/2017, 12:08 pm
Re: Tools: First strip build - first question
Dave ( of Calif.) -- 10/17/2017, 7:47 pm
Re: Tools: First strip build - first question
Bill Hamm -- 10/10/2017, 2:32 am
Re: Tools: First strip build - first question
Dave ( of Calif.) -- 10/17/2017, 8:23 pm
Re: Tools: First strip build - first question
Nick R. -- 10/7/2017, 11:47 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/7/2017, 1:31 pm
Re: Tools: First strip build - first question
Paul Sylvester -- 10/8/2017, 6:05 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/8/2017, 2:59 pm
Re: Tools: First strip build - first question
Jay Babina -- 10/8/2017, 6:54 pm
Tool are worthless, unless..... *PIC*
Laughing Loon CC&K -- 10/9/2017, 11:51 am
Well said. *NM*
Curtis Fisher -- 10/9/2017, 1:33 pm
Re: Tools: First strip build - first question
John Messinger -- 10/10/2017, 8:31 am
Re: Tools: First strip build - first question
Nick Schade - Guillemot Kayaks -- 10/10/2017, 9:11 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/10/2017, 11:48 am
Re: Tools: First strip build - first question
Bill Hamm -- 10/11/2017, 12:20 am
Re: Tools: First strip build - first question
Nick Schade - Guillemot Kayaks -- 10/11/2017, 9:21 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/11/2017, 11:58 am
Re: Tools: First strip build - first question
Bill Hamm -- 10/12/2017, 2:13 am
Re: Tools: First strip build - first question
Marc Upchurch -- 10/11/2017, 8:24 pm
Re: Tools: Belt sander CAUTION
John Messinger -- 10/11/2017, 9:08 pm
Re: Tools: Belt sander CAUTION
JayBabina -- 10/13/2017, 11:22 am
cautionary advice
Jay Babina -- 10/11/2017, 6:31 pm
Re: cautionary advice
JohnAbercrombie -- 10/11/2017, 8:14 pm
Re: cautionary advice
Björn Thomasson -- 10/27/2017, 4:31 am
Re: cautionary advice
M A Bielski -- 10/27/2017, 8:38 am
Re: cautionary advice
JohnAbercrombie -- 10/27/2017, 9:28 am
Re: Tools: First strip build - first question
Paul Harker -- 10/13/2017, 10:51 am
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/13/2017, 12:24 pm
Re: Tools: First strip build - first question
JohnAbercrombie -- 10/13/2017, 2:06 pm
Re: Tools: First strip build - first question
Bill Hamm -- 10/14/2017, 12:56 am
Re: Tools: ROS and Sanding
Laughing Loon CC&K -- 10/16/2017, 9:18 am
Re: Tools: ROS and Sanding
Paul Harker -- 10/16/2017, 10:11 am
Re: Tools: ROS and Sanding
Bill Hamm -- 10/19/2017, 2:01 am