Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Thanks! & Cabinet Scrapers...
By:Bob Marr
Date: 12/28/1998, 10:44 am
In Response To: Thanks! & Cabinet Scrapers... (John Stys)

Think of a hand-held garden hoe that's really sharp. Now visualize it being available in lots of different blade widths and curvatures. There is a set illustrated in WoodenBoat's catalog (paper).

> Hi. Thanks for all the advice...using slightly stronger sandpaper with my
> orbital sander is working nicely. I was a little nervous about starting
> the sanding job and therefore started out with 100-150. The 80 works a lot
> better for the first few passes.

> A few of you have mentioned that cabinet scrapers work well. Pardon my
> ignorance, but I can't seem to visualize what a cabinet scraper is. Are
> they similar to paint scrapers??

> John

Messages In This Thread

Sanding a Chesapeake hull
John Stys -- 12/26/1998, 9:52 pm
Thanks! & Cabinet Scrapers...
John Stys -- 12/28/1998, 8:46 am
Re: Thanks! & Cabinet Scrapers...Picture
Joe Greenley -- 12/28/1998, 2:28 pm
Re: Thanks! & Cabinet Scrapers...Picture
Marc Leroux -- 1/11/1999, 6:52 pm
Re: Thanks! & Cabinet Scrapers...Picture
Ralph Wight -- 1/12/1999, 1:57 pm
Re: Thanks! & Cabinet Scrapers...Picture
Marc Leroux -- 1/12/1999, 2:11 pm
Re: Thanks! & Cabinet Scrapers...Picture
Ralph Wight -- 1/12/1999, 9:09 pm
Re: Thanks! & Cabinet Scrapers...Picture
Mike Spence -- 1/12/1999, 1:58 am
Re: Thanks! & Cabinet Scrapers...Picture
Gary Toffelmire -- 1/11/1999, 7:59 pm
Re: Thanks! & Cabinet Scrapers...
Bob Marr -- 12/28/1998, 10:44 am
Re: Sanding a Chesapeake hull
Lee G. -- 12/27/1998, 10:38 pm
Cabinet Scrape drips, sand all very smooth
Pete Ford -- 12/27/1998, 10:19 pm
Re: Sanding a Chesapeake hull
Tony Lima -- 12/27/1998, 7:03 pm
Re: Sanding a Chesapeake hull
Don Beale -- 12/27/1998, 12:02 pm
Re: Sanding a Chesapeake hull
Guy Wright -- 12/28/1998, 10:29 am
Re: Sanding a Chesapeake hull
Nick Schade -- 12/27/1998, 10:33 am
Re: Sanding a Chesapeake hull
Paul Jacobson -- 12/26/1998, 11:50 pm
Re: Sanding a Chesapeake hull
Rick C. -- 12/27/1998, 11:49 am