>
> Fiberglass cloth (even the lighter weights) don't bend around tight radii
> very well. They do better in that regard when laid on the bias, but that
> orientation will sacrifice longitudinal strength. Gougeon says that laying
> the glass on a 15 degree bias can reduce strength along the keel by 40%!
> So, to maximize strength and to make the glassing go more smoothly leave a
> 1/4" radius on your tightest edges. It will pay big dividends for you
> when you get to that step.

For us novices out there...could I have that in layman terms? When you say 1/4" radius, should the joint stick out at least that much? Smoother "is" better, or not?