If I tell you I had just mixed it (I had) would it change your response any? Thanks again.

> Any chance the epoxy was noticibly thickening by the time you got to the
> last butt joint? If the epoxy was starting to kick-off, it may not have
> wet-out the glass or soaked into the wood too well. You could sand off the
> glass and back down to wood and reglass the seam. If it's an inside seam,
> you won't see it. If it's an outside seam you may see some color variation
> when applying epoxy to an already epoxied surface. However, if it was a
> problem with too thick epoxy, it probably didn't penetrate too far anyway.