Re: Marine ply for hull
By:Allen
Date: 4/19/2000, 1:32 pm
Date: 4/19/2000, 1:32 pm
In Response To: Re: Marine ply for hull (Nolan)
: Be careful about the plywood. I used 1/4", three ply fir from Home Depot for my Six Hour Canoe. The wood was so cheap that it leaked through the plywood. The joints were ok, but the voids in the plywood let water come in through the face. I would suggest that you use at least luan. It will be lighter than fir plywood and probably better quality.
Messages In This Thread
- Marine ply for hull
Bailey -- 4/19/2000, 10:05 am- Re: Marine ply for hull
Bill H -- 4/19/2000, 9:40 pm- Re: Marine ply for hull
Berkeley C. -- 4/19/2000, 7:07 pm- Re: Marine ply for hull
Nolan -- 4/19/2000, 10:50 am- Re: Marine ply for hull
Allen -- 4/19/2000, 1:32 pm- Re: Marine ply for hull
John B. -- 4/19/2000, 4:42 pm
- Re: Marine ply for hull
- Re: Marine ply for hull
- Re: Marine ply for hull