Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Going with 2-part poly clear
By:Ian Johnston
Date: 5/12/2000, 4:25 am
In Response To: Re: Going with 2-part poly clear (Rehd)

: Ratz.........Everyone is trying to give away boats and I still can't snag
: one.:) That's a very good question above, about covering with Varnish. As
: I understand it, not much will stick to that stuff. If not, what about
: U.V. protaction??

: Rehd

Why you would want to put varnish over poly is beyond me but if you scuff sand the poly first anything will stick to it.

As for UV protection, if on a scale of one to ten with varnish being a one polyurethane is a 100. {:o)

Messages In This Thread

Going with 2-part poly clear
Dean Trexel -- 5/11/2000, 6:50 pm
It was nice knowing you........ R.I.P.
Doug K -- 5/11/2000, 8:02 pm
Re: It was nice knowing you........ R.I.P.
Dean Trexel -- 5/11/2000, 9:48 pm
Re: It was nice knowing you........ R.I.P.
Marty Hangarter -- 5/12/2000, 8:32 am
Re: moisture-cure urethanes
Dean Trexel -- 5/12/2000, 4:40 pm
Re: Going with 2-part poly clear
Rehd -- 5/11/2000, 7:29 pm
Re: Going with 2-part poly clear
Rick Thomas -- 5/14/2000, 12:43 pm
Re: Going with 2-part poly clear
Dean Trexel -- 5/11/2000, 7:40 pm
Re: Going with 2-part poly clear
Ian Johnston -- 5/12/2000, 4:36 am
Re: Going with 2-part poly clear
Don -- 5/12/2000, 5:06 pm
Re: Going with 2-part poly clear
Ian Johnston -- 5/12/2000, 8:47 pm
Re: Going with 2-part poly clear
Rehd -- 5/11/2000, 8:41 pm
Re: Going with 2-part poly clear
Ian Johnston -- 5/12/2000, 4:25 am
Re: Going with 2-part poly clear
Rehd -- 5/12/2000, 12:21 pm