Steam the strips where you have tight bends or twists to relieve the pressure, or you'll be fighting it the whole way. Trust me, I fought mine the whole way and wish I'd used a nominal amount of steam.

Hot glue wayward strips to the form, or to a small block glued or screwed to the form.

Shawn

: The post below made me think I could get some help here with my problem. No
: matter how hard I have tried, a few strips have pulled away from the form
: (maybe elves come in after I head upstairs?). Anyway, I've used small
: brads to get them back in, and continued stripping.

: Any suggestions on how to keep the side of the boat in contact with the forms
: until the outer hull epoxy/glass has cured? Will that be enough to I don't
: have to use a strap to pull the sides together when I glass the inside?