Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

dohhhh!
By:mike allen --->
Date: 8/4/2000, 11:24 pm
In Response To: another idea (mike allen --->)

: The hatch
: needs to be 2 layers thick at the outside to allow the rods to go thru.
: (Personally, I think Iwould just make a 1/4 thick silicone gasket over top
: of the greased rods and see how it worked out and add wd on the i/s later.

no, no the pins just go under the flange, dummy. And then the only leakage potential is at the star nut.

-bozo

Messages In This Thread

Hatch hold down options
Bruce -- 8/4/2000, 9:08 pm
another idea
mike allen ---> -- 8/4/2000, 11:13 pm
Re: Knobed Hatch
Dave Houser -- 8/5/2000, 1:25 am
dohhhh!
mike allen ---> -- 8/4/2000, 11:24 pm
Re: Hatch hold down options
Dean Trexel -- 8/4/2000, 10:45 pm
Re: confounditall -- here's the pic (NT) *Pic*
Dean Trexel -- 8/4/2000, 10:47 pm
Ideas only
mike allen ---> -- 8/4/2000, 10:27 pm