Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Bungees
By:Andreas Albat
Date: 9/1/2000, 4:57 pm
In Response To: Re: Bungees (Don Beale)

I would be very interested in the picture.

Andreas

: Kent, I modified the bungee attachment on my Spring Run a little. I put four
: small D rings cut of plywood into the hull, at about the waterline. Then
: four hooks, also cut of 1/4" plywood, onto the bottom of the hatch
: covers. Then, I used four loops of bungee inside the boat, with the
: plastic pushbutton things that let you adjust the bungee. This way, I can
: adjust the internal tension. I have a picture of it, but no website yet. I
: can email it if you want.

Messages In This Thread

Hatch Hold downs
Steve Ostrem -- 8/30/2000, 2:52 pm
Re: Hatch Hold downs
Ross Leidy -- 8/30/2000, 4:33 pm
Re: Hatch Hold downs
Erez -- 8/30/2000, 9:34 pm
Seals & Carbon Fiber reinforcement
Andreas Albat -- 8/31/2000, 12:25 pm
Re: Seals & Carbon Fiber reinforcement *Pic*
Erez -- 8/31/2000, 11:46 pm
Re: Seals & Carbon Fiber reinforcement
Andreas Albat -- 9/1/2000, 10:30 am
Re: Seals & Carbon Fiber reinforcement
Don Beale -- 8/31/2000, 1:55 pm
Re: Seals & Carbon Fiber reinforcement
David Hanson -- 8/31/2000, 5:00 pm
Re: Seals & Carbon Fiber reinforcement
TOM -- 8/31/2000, 12:34 pm
Re: Seals & Carbon Fiber reinforcement
TOM -- 8/31/2000, 12:41 pm
Re: Ditto that!
Don Beale -- 8/30/2000, 7:18 pm
Re: Ditto that!
Kent LeBoutillier -- 8/31/2000, 6:10 am
Re: Bungees
Don Beale -- 9/1/2000, 2:28 pm
I would like to see the photo too
Jimmy -- 9/3/2000, 4:48 am
Re: Bungees
Andreas Albat -- 9/1/2000, 4:57 pm
Re: Somebody'll beat me to it!
Don Beale -- 8/31/2000, 11:45 am
Re: Hatch Hold downs
Bill Price -- 8/30/2000, 4:04 pm