Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Coaming Base Radius.
By:John Monfoe
Date: 1/30/2001, 5:40 am
In Response To: Re: Coaming Base Radius. (Nick Schade - Guillemot Kayaks)

: I started out using glass in the fillet at the base of the coaming. I've
: since switched to dookie schmutz made of epoxy, cabosil and wood flour.
: This is easier than the glass. I make an approximately 1/2" radius. I
: then immediately glass over it while it is still wet.

Thanks Nick, you have a great board here and I appreciate you giving me this information.

John

Messages In This Thread

Coaming Base Radius.
John Monfoe -- 1/29/2001, 5:29 am
Re: Coaming Base Radius.
Nick Schade - Guillemot Kayaks -- 1/29/2001, 8:35 am
Re: Coaming Base Radius.
John Monfoe -- 1/30/2001, 5:40 am