Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: scale is better, but test your brand first.
By:Tony
Date: 2/1/2001, 7:11 pm
In Response To: Upon further reflection... (Pete Rudie)

Like Spidey, I use a digital scale. I also use Raka and I do not want to comment on other brands. The Raka hardener and resin density is pretty darn close. I test it with a volumatric flask to 200ml and 500ml twice each, The difference is less than 4%. The pump I bought from Tap Plastic gave me an error rate of over 7%, and that is with very slow and careful pumping.
My conclsion is digital scale is by far the most accurate way to go, but test your brand first. Some brands may be different in density.

Messages In This Thread

Slow Epoxy and seams
Scott Hicks -- 1/30/2001, 12:57 am
Re: Slow Epoxy and seams
Jeff -- 1/30/2001, 9:25 pm
Re: question #2
Ross Leidy -- 1/30/2001, 12:49 pm
Mixing epoxy
Pete Rudie -- 1/30/2001, 12:36 pm
Re: Mixing epoxy
Scott Hicks -- 1/30/2001, 2:47 pm
Re: Another way
Spidey -- 1/30/2001, 7:35 pm
Re: Another way
John Monfoe -- 1/31/2001, 4:25 am
Caveat
Pete Rudie -- 1/31/2001, 12:30 pm
Re: You mean 1.96% error
Spidey -- 1/31/2001, 5:09 pm
Upon further reflection...
Pete Rudie -- 1/31/2001, 5:55 pm
Re: scale is better, but test your brand first.
Tony -- 2/1/2001, 7:11 pm
Re: Food Fight! :)
Spidey -- 1/31/2001, 7:09 pm
Re: So, the thing to do...
Grant Goltz -- 1/31/2001, 6:04 pm
Or, 58 1/1000's inch! :)
Spidey -- 1/31/2001, 5:50 pm
Slow Epoxy: GOOD-BYE!
Scott Hicks -- 1/31/2001, 4:48 pm
Re: Mixing epoxy
Pete Rudie -- 1/30/2001, 4:16 pm
Re: Slow Epoxy and seams
Charles Cooper -- 1/30/2001, 11:48 am
Re: Slow Epoxy and seams
David Hanson -- 1/30/2001, 9:35 am
Re: Slow Epoxy and seams
Scott Hicks -- 1/30/2001, 12:02 pm