: I need ideas concerning aligning stems. I thought I had aligned the stems
: untill I stood back and noticed the stems twisted. Out at the ends it
: seems hard to align the underside stems. (upside-down)
: Thanks for your help! Paul
Paul,

It shouldn't be hard. They need to be plumb which can be measured with a level or a plumb bob it your strong back is level. I just made sure my stem mold was plumb, at right angles to the station mold its screwed to. The plans should show a dimension that establishes the angle of the stem mold. If its screwed to the station mold then when the latter is plumb fore and aft, the stem mold will be right. Is this any help Paul?
Stan