Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Foam Brushes
By:Steve
Date: 3/23/2001, 10:56 am
In Response To: Re: Varnishing problem (John Michne)

: Rob - Thanks for the reply. The brushes are wood handle, black foam, with the
: plastic stiffener inside, made in China. I got them at Home Depot. I also
: have a badger hair brush - would that be any better? - John

I bought a bunch of foam brushes that were as you described made in China, wooden handle, plastic stiffener from a tool sale. When I was tipping off the bubbles on my first fill coat I started to notice tiny black specks only to realize the foam was slowing disintergrating into the epoxy. Spent alot of time trying to pick them all out. I then went to the hardware store and bought some new ones and when I compared them there was quite a bit of difference. The new ones were much denser type foam. These worked well compared to the first batch. I have a good deal on foam brushes made in China ;)

Messages In This Thread

Varnishing problem
John Michne -- 3/22/2001, 7:04 pm
Re: Varnishing problem
Ronnie -- 3/23/2001, 1:25 pm
Re: Varnishing problem
Byron -- 3/23/2001, 9:37 am
Re: Varnishing problem
Ross Leidy -- 3/23/2001, 10:29 am
Electro-static dusting cloths
John Michne -- 3/23/2001, 10:49 am
Re: Electro-static dusting cloths
Larry C. -- 3/23/2001, 12:29 pm
Yes, very likely that's why *NM*
Ross Leidy -- 3/23/2001, 11:08 am
Re: Varnishing problem
Matthew -- 3/22/2001, 7:58 pm
Re: Varnishing problem
Rob Macks -- 3/22/2001, 7:19 pm
Re: Varnishing problem
John Michne -- 3/22/2001, 8:46 pm
Foam Brushes
Steve -- 3/23/2001, 10:56 am
Re: Foam Brushes
Richard Boyle -- 3/23/2001, 11:38 am
Re: Foam Brushes
Nick Schade - Guillemot Kayaks -- 3/26/2001, 10:21 am
Re: Foam Brushes
Richard Boyle -- 3/26/2001, 6:53 pm
Re: Foam Brushes *Pic*
Nick Schade - Guillemot Kayaks -- 3/27/2001, 9:14 am
Re: Foam Brush tip
Dean Trexel -- 3/27/2001, 10:06 am
Re: Foam Brush tip
Al Gunther -- 3/29/2001, 10:54 am
Re: Foam Brushes
Dave Houser -- 3/23/2001, 7:06 pm
Re: Varnishing problem
Nick Schade - Guillemot Kayaks -- 3/23/2001, 9:23 am
Re: Varnishing problem
Rob Macks -- 3/22/2001, 9:18 pm
Rob, Let Me Get This Straight....
Brion -- 3/23/2001, 12:05 pm
Re: Rob, Let Me Get This Straight....
Rob Macks -- 3/23/2001, 1:30 pm
varnishing
Mark S. -- 3/23/2001, 1:29 pm