Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Trueing One Edge Of Lonk Planks
By:John Monfoe
Date: 4/2/2001, 5:32 am
In Response To: Trueing One Edge Of Lonk Planks (Ken)

: I have several 12 foot long by 6 inch wide planks of WRC that need to have
: one true edge cut before I cut my strips. I only have a table saw
: available. I've searched the web and found 3 different methods.

: Rehd's Board Straightener: http://www.dbeweb.com/kayak/pages/rehd.html

Rehd's board straightener works like a jointer set on its side. I really like it and I don't think it could be any simpler. Just keep the bowed curve towards the fence and keep running the board through until straight.

John

Messages In This Thread

Trueing One Edge Of Lonk Planks
Ken -- 4/2/2001, 1:56 am
Re: Trueing One Edge Of Lonk Planks
Scott E. Davis -- 4/6/2001, 2:03 pm
Re: Trueing One Edge Of Lonk Planks
Jim Lindamood -- 4/3/2001, 8:34 am
Re: Trueing One Edge Of Lonk Planks
Rehd -- 4/4/2001, 1:51 am
Ice pick? :(
Paul G. Jacobson -- 4/3/2001, 10:33 pm
Re: Ice pick? :(
MikeWhy -- 4/3/2001, 11:39 pm
scrap strips are great push sticks
Paul G. Jacobson -- 4/4/2001, 12:47 am
Re: scrap strips are great push sticks
Rehd -- 4/4/2001, 1:43 am
Then again, why bother?
Paul G. Jacobson -- 4/3/2001, 12:09 am
Re: Exactly
Grant Goltz -- 4/4/2001, 1:41 pm
An opposite viewpt
mike allen ---> -- 4/2/2001, 4:00 pm
Call me old fashioned but....
Jay Babina -- 4/2/2001, 10:43 am
Re: Trueing One Edge Of Lonk Planks
John Monfoe -- 4/2/2001, 5:32 am
Re: Trueing One Edge Of Long Planks
Ken -- 4/2/2001, 8:56 am
Re: Trueing One Edge Of Long Planks
Rob Macks -- 4/2/2001, 9:51 am
Re: Nothing wrong with a crooked board
Grant Goltz -- 4/4/2001, 1:27 pm
Re: Trueing One Edge Of Long Planks
Ken -- 4/2/2001, 4:44 pm
Re: Truing One Edge Of Long Planks
Paul G. Jacobson -- 4/2/2001, 3:07 am
Re: Truing One Edge Of Long Planks
Rehd -- 4/2/2001, 3:45 am
Re: Trueing One Edge Of Lonk Planks
Rehd -- 4/2/2001, 2:57 am