Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Gyroscopic stabilization
By:NPenney
Date: 6/17/1998, 6:29 am
In Response To: Re: Gyroscopic stabilization (Mark Kanzler)

Actually bicycle gyrospoic affects are quite negligable Mark. You'll promptly discover this if you try to ride onto ice with a bicycle. It'll fall down just as quick as you please. Even a motorcycle, which is spinning a much heavier wheel at a much higher rpm, has negligible stability contribution from the gyroscopic affects of the wheel spinning. The rpms are far too low for it to be significant.

What does significantly affect the stability of both bicycles and motorcycles is rake and head angle, and center of gravity. Which is why you can ride some bicycles and motorcycles at a walking pace with no hands. Why do you think performing cop shows are done using Harleys? :-)

> Grab a bicycle wheel by the ends of the axle, and have someone
> spin it (they'd be lucky to get 5mph surface speed at tire) and then
> try to abruptly change the spin axis. There are other factors at work
> as well, I'm sure, but gyro affects are not negligible.

Messages In This Thread

Re: Gyroscopic stabilization
Mark Kanzler -- 6/16/1998, 7:31 pm
Re: Gyroscopic stabilization
Karl Coplan -- 6/17/1998, 10:36 am
Re: Landing Gear
Mark Kanzler -- 6/17/1998, 11:10 am
Re: Gyroscopic stabilization
NPenney -- 6/17/1998, 6:29 am
Re: Gyroscopic stabilization
Mike Spence -- 6/17/1998, 1:30 am
Re: Gyroscopic stabilization
Mark Kanzler -- 6/17/1998, 11:14 am
Re: Gyroscopic stabilization
Roger Tulk -- 6/17/1998, 12:35 pm
Re: Gyroscopic stabilization
Mark Kanzler -- 6/17/1998, 11:50 am
Re: Gyroscopic stabilization
Rick C. -- 6/17/1998, 1:21 am
Re: Gyroscopic stabilization
Roger Tulk -- 6/17/1998, 9:42 am