Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: No staple method *Pic*
By:Chip Sandresky
Date: 6/29/2001, 1:23 pm
In Response To: Re: No staple method (daren neufeld)

I staple into a scrap strip which provides downward pressure to the real strip; sash cord between molds. A dab of hot glue here and there helps to keep everything from pulling away from the forms. That is a plywood C clamp on the right that is screwed to the form (not required).

Chip's Web Site

Messages In This Thread

Re: No staple method
daren neufeld -- 6/29/2001, 9:59 am
Re: No staple method *Pic*
Chip Sandresky -- 6/29/2001, 1:23 pm
Re: No staple method *Pic*
Elliott -- 6/29/2001, 12:07 pm
Re: No staple method
Jason -- 6/29/2001, 9:26 pm
Re: No staple method
!RUSS -- 6/29/2001, 1:13 pm
Re: No staple method
Elliott -- 6/29/2001, 2:00 pm
Very slick!
!RUSS -- 6/29/2001, 10:52 pm
Re: Very slick!
Elliott -- 7/2/2001, 8:45 am
sychronicity plays its fateful hand
!RUSS -- 7/3/2001, 9:25 pm
!Russ, keep me posted *NM*
elliott -- 7/5/2001, 8:32 pm