Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Surfbard skegs.
By:Paul Jacobson
Date: 7/12/1998, 7:18 pm
In Response To: Re: Surfbard skegs. (Mark Kanzler)

> One method of temporary attachment is to use hot melt glue, and
> then use a small heat gun (like the one's sold at craft stores) to
> later remove the glue. You heat the glue with the heat gun (don't
> burn the boat's finish), and wipe it off with a rag.

There are two types of hot melt glue. One melts at a lower temperature. Use that. Reheating the higher temp. hot glue in order to remove it might get a spot on your boat hot enough to cause the epoxy to soften. It should harden back when it cools, but I'd worry about future delamination at that spot.

Paul Jacobson

Messages In This Thread

Mayday Mayday! boat goes left
David Walker -- 7/6/1998, 9:17 pm
Re: Try another paddler
Jay Babina -- 7/7/1998, 2:32 pm
Re: Mayday Mayday! boat goes left
Mark Kanzler -- 7/7/1998, 11:51 am
Re: rudders
NPenney -- 7/8/1998, 8:17 am
Re: Aspect ratio.
Mark Kanzler -- 7/8/1998, 11:21 am
Re: Aspect ratio.
NPenney -- 7/8/1998, 2:34 pm
Re: Aspect ratio.
Nick Schade -- 7/8/1998, 3:17 pm
Re: Higher Aspect ratio = No Steering
NPenney -- 7/9/1998, 7:49 am
Re: Higher Aspect ratio = No Steering
Mark Kanzler -- 7/9/1998, 10:38 am
Re: Higher Aspect ratio = No Steering
NPenney -- 7/9/1998, 11:50 am
Re: Old Textbooks, etc.
Mark Kanzler -- 7/11/1998, 12:52 am
Re: Old Textbooks, etc.
NPenney -- 7/10/1998, 2:53 pm
Re: Here's a sketch of one possible solution (as described in prev post)
Mark Kanzler -- 7/8/1998, 12:41 am
Image link still not working.
Mike Spence -- 7/7/1998, 1:28 pm
Re: Image link still not working. (Sorry)
Mark Kanzler -- 7/7/1998, 1:56 pm
Re: Image working.(?)
Mark Kanzler -- 7/8/1998, 1:26 am
Not yet. - Don't despair!
Mike Spence -- 7/8/1998, 1:19 pm
Re: Not yet. - Don't despair!
Mark Kanzler -- 7/8/1998, 2:18 pm
Re: Here it is! (Satisfaction Guaranteed)
Mark Kanzler -- 7/8/1998, 10:23 pm
Re: Here it is! (Satisfaction Guaranteed)
David Walker -- 7/10/1998, 10:28 am
Re: Surfbard skegs.
Mark Kanzler -- 7/10/1998, 11:58 am
Re: Surfbard skegs.
David Walker -- 7/10/1998, 1:49 pm
Re: Surfbard skegs.
David Walker -- 7/10/1998, 5:30 pm
Re: Surfbard skegs.
Mark Kanzler -- 7/12/1998, 11:08 am
Re: Surfbard skegs.
Paul Jacobson -- 7/12/1998, 7:18 pm
Re: Surfbard skegs site (try it again please).
Mark Kanzler -- 7/10/1998, 2:50 pm
Re: Surfbard skegs site (try it again please).
Mike Spence -- 7/10/1998, 6:51 pm
Re: Here it is! (Satisfaction Guaranteed)
Nick Schade -- 7/9/1998, 4:12 pm
Re: Here it is! (Satisfaction Guaranteed)
Mark Kanzler -- 7/11/1998, 12:37 am
Re: Mayday Mayday! boat goes left
Mark Kanzler -- 7/8/1998, 12:39 am
My $0.02
CHad -- 7/7/1998, 11:29 am
P.S.
CHad -- 7/7/1998, 11:56 am
Re: P.S.
Guy Wright -- 7/7/1998, 1:46 pm
Me Too!
Shawn Baker -- 7/8/1998, 11:01 am
Re: Mayday Mayday! boat goes left
NPenney -- 7/7/1998, 7:33 am
how I solved mine.
R. N. Sabolevsky -- 7/6/1998, 11:56 pm
Re: Mayday Mayday! boat goes left
Duane Strosaker -- 7/6/1998, 11:38 pm
Re: Mayday Mayday! boat goes left
Mike Spence -- 7/7/1998, 12:11 pm
Re: Mayday Mayday! boat goes left
Paul Jacobson -- 7/6/1998, 11:20 pm
Off center fins and water flow
David Walker -- 7/8/1998, 5:28 pm
Re: Off center fins and water flow
NPenney -- 7/9/1998, 11:57 am
Re: Off center fins and water flow
Mike Spence -- 7/9/1998, 5:56 pm
Re: Off center fins and water flow
Paul Jacobson -- 7/11/1998, 2:53 am
Re: Off center fins and water flow
Mark Kanzler -- 7/10/1998, 11:47 am
Re: Off center fins and water flow
NPenney -- 7/10/1998, 6:22 am
Re: Skegs and water flow.
Mark Kanzler -- 7/8/1998, 6:10 pm
Re: Skegs and water flow.
David Walker -- 7/8/1998, 6:42 pm
Re: Skegs and water flow.
Mark Kanzler -- 7/8/1998, 7:07 pm
Re: Skegs and water flow.
David Walker -- 7/10/1998, 10:37 am
Re: Skeg attachment w/ silicone.
Mark Kanzler -- 7/10/1998, 11:34 am
Re: Mayday Mayday! boat goes left
Wes Boyd -- 7/6/1998, 10:36 pm