Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Poplar
By:Kevin Sheppard
Date: 7/13/1998, 9:14 pm
In Response To: Re: Poplar (Mark Kanzler)

I have been reading posts about building boats out of "poplar" and want to try and set the record straight. Yellow-poplar (Liriodendron tulipifera) is a species that grows in the eastern US. Other common names are tuliptree or tulip-poplar. It belongs to the Magnolia family. If you are from the east, and you refer to a wood as being poplar, this is most likely the species you are talking about. Trembling aspen (Populus tremuloides) is more wide spread, growing across the northern portions of North America, and in the Rocky Mountains. Other common names are quaking aspen, poplar, and popple. It belongs to the Salicacae, or willow family. It is much more common for lumber yards in the north and west to carry aspen.

> The poplar I've used doesn't clog the paper like pine does. It
> sands and cuts beautifully, in my somewhat limited experience.

Messages In This Thread

Types of wood acceptable for strip builts
David Semrad -- 7/12/1998, 3:52 am
Re: Types of wood acceptable for strip builts
Nick Schade -- 7/15/1998, 4:47 pm
Re: Types of wood acceptable for strip builts
Don Beale -- 7/13/1998, 1:22 am
Re: Types of wood acceptable for strip builts
Karl Kulp -- 7/13/1998, 10:16 pm
Re: Types of wood acceptable for strip builts
Paul Jacobson -- 7/12/1998, 8:19 pm
Re: Poplar
Mark Kanzler -- 7/14/1998, 12:26 am
Re: Poplar
Kevin Sheppard -- 7/13/1998, 9:14 pm
Re: Poplar
Mark Kanzler -- 7/14/1998, 10:33 am