Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: 2 oz fiberglass cloth on stripper
By:Tom Yost
Date: 10/15/2007, 1:34 pm

: I'm preparing to build an 18' x 21.6" strip kayak and an 18.5' strip
: USCA spec C1 racing canoe this winter. Excluding the affects of rocks
: scraping the glass, is 2 ounce/yard cloth strong enough when applied to
: interior and exterior? I will reinforce the bow and stern areas and any
: through-bolted points. My main concern is the canoe C1 shape having
: adequate stiffness using 1/4" strips. Additional interior bracing is
: not a problem.

I glassed a 19' X 17" kayak years ago using 4oz and it held up well. I've tried 2oz a couple of times for small projects and had trouble with it "floating".

Tom

Messages In This Thread

Strip: 2 oz fiberglass cloth on stripper
SteveR -- 10/14/2007, 9:21 am
Re: Strip: 2 oz fiberglass cloth on stripper *LINK* *Pic*
Michael Storer -- 11/21/2007, 5:31 pm
Re: Strip: 2 oz fiberglass cloth on stripper
Acors -- 10/15/2007, 3:19 pm
Re: Strip: 2 oz fiberglass cloth on stripper
Tom Yost -- 10/15/2007, 1:34 pm
Re: Strip: 2 oz fiberglass cloth on stripper
Bill Hamm -- 10/15/2007, 1:15 am
Re: Strip: 2 oz fiberglass cloth on stripper *LINK*
TOM RAYMOND -- 10/15/2007, 1:21 pm
Re: Strip: 2 oz fiberglass cloth on stripper
Bill Hamm -- 10/15/2007, 4:46 pm
Re: Strip: 2 oz fiberglass cloth on stripper *LINK* *Pic*
Michael Storer -- 10/16/2007, 11:11 pm
Re: Strip: 2 oz fiberglass cloth on stripper
Paul G. Jacobson -- 10/14/2007, 1:32 pm