Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Or, you could wait (years) for it to break 1st
By:Joe
Date: 2/28/2002, 11:01 am
In Response To: Or, you could wait (years) for it to break 1st (Paul G. Jacobson)

: With two layers of glass on the outside, and one on the inside, you should be
: doing just fine for many years to come. Are you planning on landing on
: many exposed rocks? Running rapids? Jumping up and down in the cockpit?

: Even if any of these actions is in your future, you'll find that the damge
: caused by any one or two such events should be easy to repair. You can add
: your next layer of glass as a permanent fix, after you take off the duct
: tape that would be your emergency patch.

: PGJ

Thanks. I have finally learned from your posts, something you have pointed out many times. Despite my wish to make this boat so that it will be FINISHED when I have built it, it will still be something I can or will want to add or modify or reenforce. So for now i will skip the 2nd layer football inside. Instead i put a 3" 9oz piece of tape into the fillet at the keel, and today will do the one layer of glass on the inside of the hull (second layer at cockpit bottom only). Thanks to all, for helping me save all that weight (I am more comfortable with wood, so I made my strips fine planned to 170 thousands to just save that little weight and it would be a shame to load this up with epoxy that added more weight than support.

Joe

Messages In This Thread

Epoxy: Can 2nd layer glass go right on over 1st?
Joe -- 2/27/2002, 9:27 pm
Re: Epoxy: Can 2nd layer glass go right on over 1s
Jay Babina -- 3/1/2002, 2:00 pm
Or, you could wait (years) for it to break 1st
Paul G. Jacobson -- 2/27/2002, 11:34 pm
Re: Or, you could wait (years) for it to break 1st
Joe -- 2/28/2002, 11:01 am
Re: Epoxy: Can 2nd layer glass go right on over 1s
Rehd -- 2/27/2002, 9:47 pm
Re: Epoxy: Can 2nd layer glass go right on over 1s
Joe -- 2/27/2002, 10:05 pm
Can 2nd glass go over 1st? yes and you should
Shawn Baker -- 2/27/2002, 11:16 pm
Re: Epoxy: Can 2nd layer glass go right on over 1s
Walter -- 2/27/2002, 10:40 pm