Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: MinWax’s Helmsman Clear
By:Chip Sandresky
Date: 3/12/2002, 5:36 pm
In Response To: Re: Epoxy: Chemical Stripping *Pic* (John Monfoe)

: I took a chance and settled on MinWax’s Helmsman Clear
: Polyurethane ( not the water soluble kind) because it was available
: everywhere locally, cheap, I got a quart on sale for less then $5 and
: dries in 4 hours. The quart finished my whole boat with 7 coats and was
: just the opposite of brittle in that it’s very flexible. I have never see
: any boat finished with the varnish most used on the board (seems to be
: Captains) so I can’t really compare, but I don’t see how it could be much
: more clear then what I used. I will use this product on my next boat.

Thanks for doing that footwork John. $5 sound good to me and I've always loved your boat's finish. I guess I missed your earlier posts on this. I'll have to check it out.

Messages In This Thread

Epoxy: Chemical Stripping
Stephen -- 3/11/2002, 9:34 pm
Re: Epoxy: Polish?
Dave Houser -- 3/12/2002, 7:09 pm
Re: Epoxy: Chemical Stripping
Brad Farr -- 3/12/2002, 11:53 am
Re: Epoxy: Chemical Stripping *Pic*
John Monfoe -- 3/12/2002, 4:38 am
Re: MinWax’s Helmsman Clear
Chip Sandresky -- 3/12/2002, 5:36 pm
Re: MinWax’s Helmsman Clear
daren neufeld -- 3/12/2002, 8:10 pm
Re: Epoxy: Chemical Stripping
jim kozel -- 3/11/2002, 10:24 pm
Re: Epoxy: Chemical Stripping
Stephen -- 3/11/2002, 10:30 pm