Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

S&G: PYGMY BOATS: SPLINE JOINT TECHNIQUE
By:RMAN
Date: 3/21/2002, 9:43 pm

I VIEWED SOME POSTINGS LAST WEEK SUGGESTING THE USE OF A 3 WINGED SLOT CUTTER BIT WITH A THIN KERF (1/16". THE JESADA BIT SHOULD CUT A DEPTH OF ABOUT AN
AN 1" ALLOWING A SPLINE ABOUT 2" WIDE.
ANY THOUGHTS ON USING A WIDER KERF (1/8") AND WHAT WOULD BE IDEAL SPLINE STOCK,
WHAT ABOUT GRAIN ORIENTATION OF THE SPLINE.

RMAN.

Messages In This Thread

S&G: PYGMY BOATS: SPLINE JOINT TECHNIQUE
RMAN -- 3/21/2002, 9:43 pm
another technique
mike allen ---> -- 3/22/2002, 8:13 pm
Spline joints
Paul G. Jacobson -- 3/21/2002, 11:23 pm
Re: Spline joints
Tom -- 3/23/2002, 7:31 am
Re: Spline joints
RMAN -- 3/22/2002, 1:18 am
Re: Spline joints
KenB -- 3/22/2002, 12:16 am
Re: Spline joints
Terry -- 3/22/2002, 11:05 pm
Re: S&G: PYGMY BOATS: SPLINE JOINT TECHNIQUE
jim kozel -- 3/21/2002, 10:17 pm
Re: S&G: PYGMY BOATS: SPLINE JOINT TECHNIQUE
Rehd -- 3/21/2002, 11:13 pm
Re: S&G: SPLINE JOINT ELEGANCE
Mike Hanks -- 3/22/2002, 9:48 am
Re: S&G: SPLINE JOINT ELEGANCE
Rehd -- 3/22/2002, 7:38 pm
Re: S&G: SPLINE JOINT ELEGANCE
Mike Hanks -- 3/22/2002, 11:37 pm
Click-Click !! :) *NM*
Rehd -- 3/23/2002, 1:46 am
What about an inlay
David Ross -- 3/22/2002, 1:10 pm
Re: What about an inlay
Paul G.Jacobson -- 3/23/2002, 12:03 am
Re: What about an inlay
Mike Hanks -- 3/22/2002, 3:00 pm
Re: What about an inlay
Shawn Baker -- 3/22/2002, 5:05 pm
Re: S&G: PYGMY BOATS: SPLINE JOINT TECHNIQUE
Keith Marsh -- 3/22/2002, 9:31 am
Pictures might help *Pic*
Ted Henry -- 3/21/2002, 10:49 pm
Spline Joint Parts *NM* *Pic*
Ted Henry -- 3/21/2002, 10:51 pm
Finished Joint *NM* *Pic*
Ted Henry -- 3/21/2002, 10:54 pm
Re: Finished Joint
Nick Schade - Guillemot Kayaks -- 3/22/2002, 11:08 am
You can't do a lap joint with a kit...
Brian Nystrom -- 3/22/2002, 12:50 pm
Re: You can't do a lap joint with a kit...
Nick Schade - Guillemot Kayaks -- 3/22/2002, 1:48 pm
Re: You can't do a lap joint with a kit...
Shawn Baker -- 3/22/2002, 4:53 pm
Re: You can't do a lap joint with a kit...
Mike Hanks -- 3/22/2002, 2:55 pm
Re: You can't do a lap joint with a kit...
Shawn Baker -- 3/22/2002, 4:55 pm
Re: You can't do a lap joint with a kit...
David Ross -- 3/22/2002, 1:17 pm
Re: Finished Joint
Ted Henry -- 3/22/2002, 12:47 pm
Re: Finished Joint
LeeG -- 3/22/2002, 8:21 pm
Re: Finished Joint
Shawn Baker -- 3/22/2002, 12:26 pm