S&G: S&G 3 Panel (per side) hard-chine sea kayak
By:Andre Janecki
Date: 7/21/2002, 5:15 am
Date: 7/21/2002, 5:15 am
I've designed and completed a hard-chine sea kayak using the above.
The bow and stern can be shaped more freely and the hard-chine retained. Of course it is only another compromise, but could be a success in a design for the advanced sea kayaking community.
I was interested if any one used S&G method as there is no problem what so ever in the panel lay outs, even for the 1-st time builder.
Before I can claim my "15 minutes of fame"
I thought I'd better check with your forum.
Thankyou for your responces,
Andre
Messages In This Thread
- S&G: S&G 3 Panel (per side) hard-chine sea kayak
Andre Janecki -- 7/21/2002, 5:15 am- 3 Panel hard-chine sea kayak = Necky
Greg Jones -- 7/22/2002, 9:13 pm- Re: 3 Panel hard-chine sea kayak = Necky
LeeG -- 7/23/2002, 12:27 am
- Re: S&G: S&G 3 Panel (per side) hard-chine sea kay *Pic*
Pete Roszyk -- 7/21/2002, 3:49 pm- Re: S&G: S&G 3 Panel (per side) hard-chine sea kay
Bobby Curtis -- 7/21/2002, 7:09 am - Re: 3 Panel hard-chine sea kayak = Necky
- 3 Panel hard-chine sea kayak = Necky