Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Fiberglass Delamination
By:Rob Macks
Date: 8/22/2002, 10:16 am
In Response To: Re: Epoxy: Fiberglass Delamination (Pete Rudie)

: This layup schedule certainly would work, but would be overkill on a kayak.
: For boats that are immersed in water for long periods of time the
: requirements are much different than for our kayaks which are wet for only
: hours, then pulled out and stored dry.

Still, this is a good reminder to make certain you've applied sufficient resin to interior
surfaces of your boat to ensure they are waterproof for the longevity of your boat.

Rob

Messages In This Thread

Epoxy: Fiberglass Delamination
Robert Regester -- 8/21/2002, 6:13 pm
Re: Epoxy: Fiberglass Delamination
Jay Babina -- 8/22/2002, 3:20 pm
Re: Epoxy: Fiberglass Delamination
Pete Rudie -- 8/21/2002, 11:30 pm
Re: Epoxy: Fiberglass Delamination
Rob Macks -- 8/22/2002, 10:16 am
a combination of problems and cures
Paul G. Jacobson -- 8/21/2002, 11:30 pm