Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Imbedding hardware...
By:srchr/gerald
Date: 5/23/2003, 8:21 pm
In Response To: S&G: Imbedding hardware... (David Hill)

I hope so because that's probably what I'll do. One other possibility is that I may use a washer and wingnut on the bottom, bolt it all together, and embed the wingnut so it won't turn, or get lost. I'd use locktite in that case. This would only need to be done at the bow and stern for me. I can reach the rest of them with the nylon safety nut.

Messages In This Thread

S&G: Imbedding hardware...
David Hill -- 5/23/2003, 7:55 pm
Re: S&G: Imbedding hardware...
Don Lucas -- 5/24/2003, 10:33 am
Re: S&G: Imbedding hardware...
David Hill -- 5/24/2003, 12:38 pm
Re: S&G: Imbedding hardware-Caution
Jay Thomas -- 5/24/2003, 5:22 pm
Re: S&G: Imbedding hardware-Caution
Don Lucas -- 5/25/2003, 10:59 am
hardware...
Randy Knauff -- 5/24/2003, 3:57 am
Re: S&G: Imbedding hardware...
Reg Lake -- 5/24/2003, 2:26 am
Re: S&G: Imbedding hardware...
Rod Tait -- 5/23/2003, 9:04 pm
Re: S&G: Imbedding hardware...
srchr/gerald -- 5/23/2003, 8:21 pm