Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Urethane Safety Issues
By:Bill Hamm
Date: 5/5/2008, 2:10 am
In Response To: Re: Urethane Safety Issues (Roy)

: SNIP

: So how does one know if the

: SNIP

: Ted

: Which number 3 M cartridge did You find to specifically mention the
: isocyanates?

: Best Wishes
: Roy

There are no cartridges that are designed specifically for isocyanates. Not going to be one either. Cartridges don't take it out of the air, that's why a supplied air respirator is required.

If you're putting this stuff on without spraying it, you need a general organic cartridge to remove any traces in the air. And you need a fair amount of ventilation, don't even think about doing this in a closed room.

Bill H.

Messages In This Thread

Material: hBN Coating Abrasion Test *LINK*
Dan Caouette (CSFW) -- 4/29/2008, 8:25 am
Re: Material: hBN Coating Abrasion Test
Acors -- 5/9/2008, 5:11 pm
Re: Material: hBN Coating Abrasion Test------WebKi
Dan Caouette (CSFW------WebKitFormBoundaryHAvdf7mj -- 5/12/2008, 8:21 am
Re: Material: hBN Coating Abrasion Test
Bill Hamm -- 4/30/2008, 1:05 am
Re: Material: hBN Coating Abrasion Test
Robert N Pruden -- 5/2/2008, 1:50 pm
Re: Material: hBN Coating Abrasion Test
Dan Caouette (CSFW) -- 4/30/2008, 10:17 am
Urethane Safety Issues
Ted Henry -- 4/29/2008, 4:57 pm
Re: Urethane Safety Issues
Roy -- 5/7/2008, 11:05 am
Re: Urethane Safety Issues
Roy -- 5/4/2008, 11:06 am
Re: Urethane Safety Issues
Bill Hamm -- 5/5/2008, 2:10 am
Ditto to what Bill said...------WebKitFormBoundary
Dan Caouette (CSFW)------WebKitFormBoundarydta+Yzz -- 5/5/2008, 9:00 am
Re: Urethane Safety Issues
Roy -- 5/5/2008, 5:58 am
Re: Urethane Safety Issues
Dan Caouette (CSFW) -- 4/30/2008, 10:02 am
Re: Urethane Safety Issues
Dan Caouette (CSFW) -- 4/30/2008, 10:06 am
Part III
Dan Caouette (CSFW) -- 4/30/2008, 10:06 am
Part II
Dan Caouette (CSFW) -- 4/30/2008, 10:04 am
Re: Urethane Safety Issues Part 1
Dan Caouette (CSFW) -- 4/30/2008, 10:03 am
Re: Urethane Safety Issues
Steve Rasmussen -- 4/29/2008, 5:21 pm
Re: Urethane Safety Issues
Bill Hamm -- 4/30/2008, 1:11 am
Re: Urethane Safety Issues
Steve Rasmussen -- 4/30/2008, 9:32 am
Re: Urethane Safety Issues
Ted Henry -- 4/29/2008, 9:11 pm
Re: Urethane Safety Issues
Steve Rasmussen -- 4/29/2008, 9:37 pm
Re: Urethane Safety Issues
Bill Hamm -- 4/30/2008, 1:14 am
Re: Urethane Safety Issues
Steve Rasmussen -- 4/29/2008, 7:50 pm
Re: Material: hBN Coating Abrasion Test
Bryan Hansel -- 4/29/2008, 9:44 am
Re: Material: hBN Coating Abrasion Test
Acors -- 5/9/2008, 6:01 pm
Re: Material: hBN Coating Abrasion Test
Dan Caouette (CSFW) -- 4/30/2008, 9:40 am
Re: Material: hBN Coating Abrasion Test
Bill Hamm -- 4/30/2008, 1:07 am
Re: Material: hBN Coating Abrasion Test
Bryan Hansel -- 4/30/2008, 8:58 am
Re: Material: hBN Coating Abrasion Test
Bill Hamm -- 5/1/2008, 1:21 am
Test Link *LINK*
Dan Caouette (CSFW) -- 4/29/2008, 8:27 am
question
LeeG -- 5/14/2008, 12:48 pm
Re: question------WebKitFormBoundaryaMY9uSPYUF94+D
Dan Caouette (CSFW)------WebKitFormBoundaryaMY9uSP -- 5/14/2008, 3:17 pm
Re: Test Link
Dave Reekie -- 4/29/2008, 1:14 pm