Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Glass Bulkheads
By:Pawistik
Date: 6/25/2008, 1:47 pm
In Response To: Re: Strip: Glass Bulkheads (Mike Savage)

: Hi Bryan,
: You can get a lighter lay-up with CSM if you use pressure on the lay-up when
: curing.
: Lay out the CSM on a smooth waxed surface, saturate with resin, lay another
: smooth waxed surface on top and add weight so the excess resin is squeezed
: out.
: Cut out the bulkhead shapes when cured.

: Do a test piece to get the correct weight so the CSM isn't starved of resin.
: The resin/glass ratio for CSM is between 2:1 and 2.5:1 for the best strength
: as opposed to 1:1 to 1.2:1 for cloth or woven rovings.

: Hope this helps,
: Mike Savage
: South West cork

For the excess to squeeze out, don't you have to have someplace for the resin to go? Is that where peelply applications come in?
Cheers,
The other Bryan

Messages In This Thread

Strip: Glass Bulkheads
Bryan Hansel -- 6/23/2008, 10:20 am
Re: Strip: Glass Bulkheads
Bill Hamm -- 6/25/2008, 2:35 pm
Re: Strip: Glass Bulkheads
Reg Lake -- 6/24/2008, 10:29 pm
Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/26/2008, 7:57 pm
Re: Strip: Glass Bulkheads Forms *Pic*
Reg Lake -- 6/26/2008, 10:00 pm
Re: Strip: Glass Bulkheads Forms
Bryan Hansel -- 6/27/2008, 10:24 pm
Re: Strip: Glass Bulkheads
kelly t -- 6/25/2008, 1:40 am
Re: Strip: Glass Bulkheads
Bill Hamm -- 6/26/2008, 12:58 am
Re: Strip: Glass Bulkheads
Reg Lake -- 6/25/2008, 3:34 am
Re: Strip: Glass Bulkheads
Charlie -- 6/24/2008, 9:04 pm
Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/24/2008, 9:30 pm
Re: Strip: Glass Bulkheads
Pawistik -- 6/24/2008, 5:52 pm
Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/24/2008, 9:27 pm
Re: Strip: Glass Bulkheads
Mike Savage -- 6/25/2008, 9:23 am
Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/26/2008, 7:53 pm
Re: Strip: Glass Bulkheads
Mike Savage -- 6/26/2008, 9:28 pm
Re: Strip: Glass Bulkheads
Dan Caouette (CSFW) -- 6/27/2008, 8:23 am
Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/27/2008, 10:28 pm
Re: Strip: Glass Bulkheads
Bill Hamm -- 6/27/2008, 11:04 pm
Re: Strip: Glass Bulkheads
Bill Hamm -- 6/27/2008, 10:43 am
Re: Strip: Glass Bulkheads
Pawistik -- 6/25/2008, 1:47 pm
Re: Strip: Glass Bulkheads
Bill Hamm -- 6/25/2008, 2:33 pm
Re: Strip: Glass Bulkheads
Donovan -- 6/23/2008, 11:36 pm
Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/24/2008, 9:31 pm
Re: Strip: Glass Bulkheads
Bill Hamm -- 6/25/2008, 1:32 am
Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/26/2008, 7:54 pm
Re: Strip: Glass Bulkheads
Bill Hamm -- 6/26/2008, 8:39 pm
Re: Strip: Glass Bulkheads
Bill Hamm -- 6/26/2008, 8:38 pm
Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/27/2008, 10:28 pm
Re: Strip: Glass Bulkheads
Donovan -- 6/24/2008, 10:56 pm
Re: Strip: Glass Bulkheads
Toni V -- 6/24/2008, 1:57 am