: Yesterday I tried using a mirror as a form release for laminating bulkheads
: (wood with glass on each side). It was a new one that got broken before I
: had a chance to install it (man that sucked). It didn't work so well: the
: epoxy stuck to the mirror for about 10% of the area. I got it off
: eventually and will have a few repair areas. I hope your battle goes
: better than mine...
: I like the idea of the molded bulkheads... Cheap pink Styrofoam covered in
: packing tape could be used as the mold.
: /Dan
Still recommend mylar (cheap window shrink film) as a mold release, works well and is cheap. It does tear easily though so if there are sharp corners on the surface you're laminating on they need taped to prevent this.
Bill H.
Messages In This Thread
- Strip: Glass Bulkheads
Bryan Hansel -- 6/23/2008, 10:20 am- Re: Strip: Glass Bulkheads
Bill Hamm -- 6/25/2008, 2:35 pm- Re: Strip: Glass Bulkheads
Reg Lake -- 6/24/2008, 10:29 pm- Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/26/2008, 7:57 pm- Re: Strip: Glass Bulkheads Forms *Pic*
Reg Lake -- 6/26/2008, 10:00 pm- Re: Strip: Glass Bulkheads Forms
Bryan Hansel -- 6/27/2008, 10:24 pm
- Re: Strip: Glass Bulkheads Forms
- Re: Strip: Glass Bulkheads
kelly t -- 6/25/2008, 1:40 am- Re: Strip: Glass Bulkheads
Bill Hamm -- 6/26/2008, 12:58 am- Re: Strip: Glass Bulkheads
Reg Lake -- 6/25/2008, 3:34 am - Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads Forms *Pic*
- Re: Strip: Glass Bulkheads
Charlie -- 6/24/2008, 9:04 pm- Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/24/2008, 9:30 pm
- Re: Strip: Glass Bulkheads
Pawistik -- 6/24/2008, 5:52 pm- Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/24/2008, 9:27 pm- Re: Strip: Glass Bulkheads
Mike Savage -- 6/25/2008, 9:23 am- Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/26/2008, 7:53 pm- Re: Strip: Glass Bulkheads
Mike Savage -- 6/26/2008, 9:28 pm- Re: Strip: Glass Bulkheads
Dan Caouette (CSFW) -- 6/27/2008, 8:23 am- Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/27/2008, 10:28 pm- Re: Strip: Glass Bulkheads
Bill Hamm -- 6/27/2008, 11:04 pm
- Re: Strip: Glass Bulkheads
Bill Hamm -- 6/27/2008, 10:43 am - Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
Pawistik -- 6/25/2008, 1:47 pm- Re: Strip: Glass Bulkheads
Bill Hamm -- 6/25/2008, 2:33 pm
- Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
Donovan -- 6/23/2008, 11:36 pm- Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/24/2008, 9:31 pm- Re: Strip: Glass Bulkheads
Bill Hamm -- 6/25/2008, 1:32 am- Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/26/2008, 7:54 pm- Re: Strip: Glass Bulkheads
Bill Hamm -- 6/26/2008, 8:39 pm- Re: Strip: Glass Bulkheads
Bill Hamm -- 6/26/2008, 8:38 pm- Re: Strip: Glass Bulkheads
Bryan Hansel -- 6/27/2008, 10:28 pm
- Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
Donovan -- 6/24/2008, 10:56 pm - Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
Toni V -- 6/24/2008, 1:57 am - Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads
- Re: Strip: Glass Bulkheads