Aft Bulkheads and space behind the seat.
By:jesper
Date: 8/7/2008, 4:16 am
Date: 8/7/2008, 4:16 am
In Response To: Re: Angled Bulkheads *Pic* (Dave Houser)
: Angling the aft bulkhead is merely to reduce water volume in the cockpit by
: more or less following the curve of your rump.
I retrofitted an aft bulkhead to my Guilly, about 6 inches behind the seat. I thought it would be a nice place to keep the sponge, little extra gear etc. but have regretted it ever since.
Emptying the last 1/2 gallon out is impossible. The sponge is right at hand though ;-)
Brgds,
Jesper,
Copenhagen, DK
Messages In This Thread
- Strip: Fiberglass bulkheads *LINK* *Pic*
Bryan Hansel -- 8/4/2008, 5:56 pm- Re: Strip: Fiberglass bulkheads
Gary Dierking -- 8/5/2008, 4:31 pm- Re: Strip: Fiberglass bulkheads
Bryan Hansel -- 8/6/2008, 1:26 am
- Angled Bulkheads
Mike Bielski -- 8/4/2008, 9:26 pm- Re: Angled Bulkheads
Bryan Hansel -- 8/4/2008, 11:58 pm- Re: Angled Bulkheads
Mike Bielski -- 8/5/2008, 12:37 am- Re: Angled Bulkheads
Bryan Hansel -- 8/5/2008, 12:47 am- Re: Angled Bulkheads *Pic*
Dave Houser -- 8/5/2008, 3:59 pm- Re: Angled Bulkheads *Pic*
Andy Waddington -- 8/21/2008, 12:53 pm- Re: Angled Bulkheads
Bryan Hansel -- 8/21/2008, 11:28 pm
- Aft Bulkheads and space behind the seat.
jesper -- 8/7/2008, 4:16 am- Re: Aft Bulkheads and space behind the seat.
tkennefick -- 8/21/2008, 4:23 pm- Re: Aft Bulkheads and space behind the seat.
Bill Hamm -- 8/22/2008, 1:45 am
- Re: Aft Bulkheads and space behind the seat.
- Re: Angled Bulkheads
Bryan Hansel -- 8/6/2008, 1:24 am- Re: Angled Bulkheads
Dan Caouette (CSFW) -- 8/6/2008, 8:28 am- Re: Angled Bulkheads
Mike Bielski -- 8/6/2008, 11:27 am
- Re: Angled Bulkheads
- Re: Angled Bulkheads
- Re: Angled Bulkheads *Pic*
- Re: Angled Bulkheads *Pic*
- Re: Angled Bulkheads
- Re: Angled Bulkheads
- Re: Strip: Fiberglass bulkheads
- Re: Strip: Fiberglass bulkheads