Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Edge delamination

By:Brian Nystrom
Date: 8/14/2008, 8:11 am

After you strip the glass, wash the surface BEFORE sanding it. You want to remove the blush first, so you don't sand it INTO the epoxy.

Epoxy: Edge delamination
Glen Gray -- 8/13/2008, 4:13 am

Re: Epoxy: Edge delamination
Glen Gray -- 8/16/2008, 9:21 am

Re: Epoxy: Edge delamination
JohnK -- 8/16/2008, 5:00 pm

Re: Epoxy: Edge delamination
JohnK -- 8/14/2008, 5:04 am

Re: Epoxy: Edge delamination
Brian Nystrom -- 8/14/2008, 8:11 am

Re: Epoxy: Edge delamination
JohnK -- 8/14/2008, 6:29 pm

Another option is...
Brian Nystrom -- 8/15/2008, 7:30 am

Re: Another option is...
Glen Gray -- 8/15/2008, 6:24 pm

Re: Epoxy: Edge delamination
JohnK -- 8/13/2008, 7:52 pm

Re: Epoxy: Edge delamination *Pic*
Glen Gray -- 8/14/2008, 3:48 am

Re: Epoxy: Edge delamination
Glen Gray -- 8/14/2008, 6:59 am

Re: Epoxy: Edge delamination *Pic*
Glen Gray -- 8/14/2008, 7:19 am

Re: Epoxy: Edge delamination *Pic*
Glen Gray -- 8/14/2008, 7:22 am

Re: Epoxy: Edge delamination
Bill Hamm -- 8/16/2008, 1:44 am

Re: Epoxy: Edge delamination
JohnK -- 8/14/2008, 6:22 pm

KayakForum.com