Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Epoxy sanding problems
By:Podge
Date: 9/10/2008, 9:31 am
In Response To: Re: Epoxy: Epoxy sanding problems (Bill Hamm)

Thanks guys. It's very wet and misreable in Ireland at the moment so may not be helping the cause but strange how one side was fine and the other is a pain. The other thing that just occurred to me was maybe it hadn't cured properly because of the weather but I put both coats on at the same time so seems unlikely?.
Plenty of water and scubbing tonight after work then.
As always thanks for the advise
Pat

Messages In This Thread

Epoxy: Epoxy sanding problems
Pat Pierce -- 9/10/2008, 3:12 am
Re: Epoxy: Epoxy sanding problems
Etienne Muller -- 9/15/2008, 2:16 pm
The blush test
Jay Babina -- 9/11/2008, 9:52 am
Re: Epoxy: Epoxy sanding problems
Bill Hamm -- 9/10/2008, 6:46 am
Re: Epoxy: Epoxy sanding problems
Podge -- 9/10/2008, 9:31 am
Re: Epoxy: Epoxy sanding problems
Kent LeBoutillier -- 9/10/2008, 11:50 am
Re: Epoxy: Epoxy sanding problems
Podge -- 9/10/2008, 4:08 pm
Re: Epoxy: Epoxy sanding problems
Paul G. Jacobson -- 9/10/2008, 6:45 pm
Re: Epoxy: Epoxy sanding problems
Podge -- 9/11/2008, 8:54 am
Re: Epoxy: Epoxy sanding problems
Glen Gray -- 9/10/2008, 4:58 pm
Re: Epoxy: Epoxy sanding problems
Toni V -- 9/10/2008, 10:02 am
Re: Epoxy: Epoxy sanding problems
Dave Reekie -- 9/10/2008, 10:00 am
Re: Epoxy: Epoxy sanding problems
Toni V -- 9/10/2008, 5:39 am