Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Graphite?
By:Andrew Elizaga
Date: 9/27/2008, 3:11 am
In Response To: Re: Epoxy: Graphite? (Dan Caouette (CSFW))

Dan,

Is that 5% aerosil and 15% hBN by volume or weight?

Andrew

: Hi Bill,

: For the Azure I applied three coats over two days: First in the AM, the
: second in the PM, with the last the next morning. I thought it sanded
: fine. I even sanded between coats with some 180 to knock off the brush
: strokes. It's not easy but it is possible. I was able to sand and polish
: it to a satin sheen after a few days. I used MAS resin, about 5% aerosil
: and 15% hBN.

: Dan

Messages In This Thread

Epoxy: Graphite?
Aaron B. -- 9/24/2008, 12:16 pm
Re: Epoxy Graphite : where ?
Tommy -- 9/25/2008, 2:18 pm
Re: Epoxy Graphite : where ?
Bill Hamm -- 9/27/2008, 1:58 am
Re: Epoxy: Graphite?
Chris Ostlind -- 9/25/2008, 11:43 am
Re: Epoxy: Graphite?
Aaron B. -- 9/25/2008, 11:58 am
Re: Epoxy: Graphite?
Bill Hamm -- 9/27/2008, 1:57 am
Re: Epoxy: Graphite?
Bill Hamm -- 9/25/2008, 10:07 am
Re: Epoxy: Graphite?
Greg H -- 9/24/2008, 12:57 pm
Re: Epoxy: Graphite?
Bill Hamm -- 9/24/2008, 2:40 pm
Re: Epoxy: Graphite?
Dan Caouette (CSFW) -- 9/25/2008, 9:32 am
Re: Epoxy: Graphite?
Andrew Elizaga -- 9/27/2008, 3:11 am
Re: Epoxy: Graphite?
Dan Caouette (CSFW) -- 9/29/2008, 8:28 am
Re: Epoxy: Graphite?
Bill Hamm -- 9/30/2008, 1:55 am
Re: Epoxy: Graphite?
Toni V -- 9/25/2008, 2:20 pm
Re: Epoxy: Graphite?
Dan Caouette (CSFW) -- 9/29/2008, 8:31 am
Re: Epoxy: Graphite?
Bill Hamm -- 9/25/2008, 10:05 am