Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Oil spitting stapler
By:Paul G. Jacobson
Date: 8/10/2009, 12:18 pm
In Response To: Re: Strip: Porter Cable Upholstery Stapler (Chris Sperry)

The small amount of oil which might be ejected from air-powered staplers can be easily controlled. Loosely wrap a cotton rag around the exhaust port on the tool. Two or three layers of fabric will catch and absorb any oil the tool spits out. Change the rag when it gets too filthy. Keep the wrapping loose so you don't restrict the exhaust. Might be a good way to use those sox which lose their mates in the wash.

PGJ

Messages In This Thread

Strip: Porter Cable Upholstery Stapler *Pic*
Chris Sperry -- 12/6/2008, 12:31 pm
Re: Response to response.
Roger Van Couwenberghe -- 8/9/2009, 2:45 pm
Re: Response to response.
Paul G. Jacobson -- 8/10/2009, 2:07 pm
Re: Response to response.
Bill Hamm -- 8/10/2009, 12:07 am
Re: Response to response.
Mike Savage -- 8/9/2009, 3:47 pm
Re: Strip: Porter Cable Upholstery Stapler *LINK*
MacMcCaskie -- 12/11/2008, 8:41 pm
Re: Strip: Porter Cable Upholstery Stapler
Larry C. -- 12/7/2008, 10:07 am
Re: Strip: Porter Cable Upholstery Stapler
Chris Sperry -- 12/7/2008, 2:16 pm
Oil spitting stapler
Paul G. Jacobson -- 8/10/2009, 12:18 pm
Re: Oil spitting stapler
Andy Waddington -- 8/10/2009, 1:22 pm
Re: Oil spitting stapler
Robert N Pruden -- 8/13/2009, 10:15 am
Re: Oil spitting stapler
Mike Savage -- 8/13/2009, 1:31 pm
Re: Oil spitting stapler
Robert N Pruden -- 8/13/2009, 2:52 pm
Re: Oil spitting stapler
Mike Savage -- 8/14/2009, 6:05 am
Re: Oil spitting stapler
Andy Waddington -- 8/23/2009, 4:36 pm
Re: Oil spitting stapler
Bill Hamm -- 8/24/2009, 12:12 am
Re: Strip: Porter Cable Upholstery Stapler
Kurt Maurer -- 12/7/2008, 6:56 pm
Re: Strip: Porter Cable Upholstery Stapler
george jung -- 12/8/2008, 11:52 pm
Re: Strip: Porter Cable Upholstery Stapler
Bill Hamm -- 12/7/2008, 12:41 am
Re: Strip: Porter Cable Upholstery Stapler
Kurt Maurer -- 12/6/2008, 8:59 pm
Re: Strip: Porter Cable Upholstery Stapler
Chris Sperry -- 12/6/2008, 11:09 pm